What Did You Do With Your Rig Today?

[Lanlubber In Remembrance]

Not today, but this is the first chance I've gotten to post...
Went to Wyoming, up by the Montana border
To hunt these
View attachment 175438

Ran into a lot of this

View attachment 175439

Saw some cool clouds, like these

View attachment 175440

View attachment 175441

All I ended up with was this

View attachment 175442

Had a great time.

Great camouflage ! :-)

 

[Downs]

Front brakes rebuilt and tub back on.

 

[Staticline40]

I installed the Genesis Offroad dual battery setup in my 2nd Gen Tacoma. I'm still cleaning things up and will be adding solar soon. I may have to rethink the location of the SPOD as getting at the fuse box is nearly impossible now.

 

[Dlnuckolls]

Today I spent installing a couple of low budget mods. Nothing super flashy, but some cool looking things nonetheless:

My OB member medallions and some color matched D-Ring isolators!

 

[socal66]

Made is out to Anza Borrego for a quick weekend trip.

 

[RoarinRow]

Today I spent installing a couple of low budget mods. Nothing super flashy, but some cool looking things nonetheless:

My OB member medallions and some color matched D-Ring isolators!

Nice placement on the badges!

Made is out to Anza Borrego for a quick weekend trip.

View attachment 175643

Ohh matchy matchy with bags and rig! :)

 

[peeeeetey]

OK I am at a stopping point to ask y'all...I have a roar that sounds like tire noise and it persists on dirt. Not good. Tahoe Z71 G80 rear axle. I replaced the front hubs checked both diffs and tfer case all full with appropriate oils. Only thing left in my mind is rear axle bearings which is a nasty job due to the fact that there are keys inside the diff that have to be removed to release the axles. My question is does anybody know if the tool used by Timmy the tool man for Toyota axles tool will work on Chevy axles?

 

[Sparksalot]

OK I am at a stopping point to ask y'all...I have a roar that sounds like tire noise and it persists on dirt. Not good. Tahoe Z71 G80 rear axle. I replaced the front hubs checked both diffs and tfer case all full with appropriate oils. Only thing left in my mind is rear axle bearings which is a nasty job due to the fact that there are keys inside the diff that have to be removed to release the axles. My question is does anybody know if the tool used by Timmy the tool man for Toyota axles tool will work on Chevy axles?

Are you a member of the tahoeyukonforum.com by chance? There is a wealth of knowledge specific to our rigs there. There are even subforums for each generation.

Chevy Tahoe Forum | GMC Yukon Forum | Tahoe Z71 | Cadillac Escalade - Tahoe Yukon Forum

Tahoe Forum, tahoe, yukon, gmc, chevy

www.tahoeyukonforum.com

2000 - 2006 Tahoe/Yukon/Escalade Models

www.tahoeyukonforum.com

 

[AllenK]

Getting all packed up for a another blast out west.

 

[Paula - Canadian Explorer]

Got my new Iceco fridge and Jackery battery combo set up. Both were on sale when I bought them. I left the fridge in the rig for about 5 hours and it only used 10% of the battery. Not a scientific test, but I should be fine when parked for the night. Also, got a new Wavian gas can to replace my jerry can that was lost around mile 50 of the mojave road.

View attachment 175554

Hey Mike! What do you have hanging behind the back right side passenger seat? Been looking for something to hold stuff back there. Care to share the details? Thanks.

 

[Paula - Canadian Explorer]

Finished up the Cathedrals Valley Road at Capitol Reef. The rangers said that the road was impassable due due to deep sand and 4WD we’re getting stuck, but I assumed it was people who were unprepared or never off road before. Glad I did it.

Must of been quite the adventure! Pics are awesome!

 

[472HemiGTX]

Hunting in the Blue Mountains of Oregon.

 

[Staticline40]

Finished up the Cathedrals Valley Road at Capitol Reef. The rangers said that the road was impassable due due to deep sand and 4WD we’re getting stuck, but I assumed it was people who were unprepared or never off road before. Glad I did it.

Awesome!!

 

[UltimaSanctus]

Got rid of the dusty, restricting, factory intake tube for one from AirRaid. Probably making 1 extra hp and 1 or 2 more mpg haha. Put an AEM dryflow filter in the stock airbox cause I figured that would be best to keep out dust and dirt. I can now hear the induction noise for a split second before the exhaust overpowers it

 

[RJFJR]

Relocated my ARB Compressor from the engine compartment to the rear on a molly panel to make room for 2nd battery at some point. Still thinking about routing wiring behind the interior panel.

 

[Lanlubber In Remembrance]

Hunting in the Blue Mountains of Oregon.

View attachment 175795View attachment 175796View attachment 175797View attachment 175798View attachment 175799View attachment 175800View attachment 175801View attachment 175802View attachment 175803View attachment 175804

You went hunting and found heaven. Thanks for sharing you adventure.

 

[M Rose]

I went out to do some work on the Bronco yesterday to find that someone took my tool chest.

 

[RoarinRow]

I went out to do some work on the Bronco yesterday to find that someone took my tool chest.

Hopefully 'Karma' will get them!

 

[M Rose]

Hopefully 'Karma' will get them!

I hope so.

 

[Downs]

Today's CJ progress. Brake master Cylinder on but not hooked up or bled yet, pedals hung, clutch adjusted, tub wiring harness laid out and partially hooked up, heater/fan box, fresh air vent and drain line in, tail lights installed, e brake pedal hung and hooked up, hi beam switch in and hooked up.

Also ran down to a nearby town and picked up an OEM windshield for the new frame.