Traveler III
We don’t get snow very often in the DC area and I love it when we do!
What Did You Do With Your Rig Today?
- Thread starter iamout
- Start date
I seen the footprints beside the vehicle and thought “ oh some is stuck walking for help” then I realized that they were yours
World Traveler III
Replaced the old drums with disc brakes. Kit from lugnut 4x4. Required a little clearancing for it to work but it bolted right up. Replaced bearings and seals while I was in there.
Educator I
- 10,890
- First Name
- Jim
- Last Name
- Bro
- Member #
12989
- Service Branch
- USAF DAV
Completed the GMRS install...Pic 1&2 show the mount (With cap on) on my rack. Pic3 is where I went thru seam and Pic4 shows radio mounted to tranny well next to my S&W holster.
Member III
Here are a few more pics of mu coastal offroad bumper build. The bumper comes flat in a box.
After the stock bumper is gone, the mounting plate gets bolted on the stock location
Next is the 2 side plates in factory holes. Bolt to the frame then tack.
The winch mount plate goes inand rests on a nice spot. No winch yet. Maybe later. Then the front plate. Fog lights ready. I had a set and he custom cut the holez my size.
The front fairlead piece. The mid part is done.
The wings are 4 or 5 pieces each. One side done.
And the other side.
That is as far as i got this day. Shell of the old bumper put back on with a few clips and a prayer until next time.
There is a front plate that goes on after some beads are layed. Then more beads and grinding and flapping.
More updates as the progress progresses.
After the stock bumper is gone, the mounting plate gets bolted on the stock location
Next is the 2 side plates in factory holes. Bolt to the frame then tack.
The winch mount plate goes inand rests on a nice spot. No winch yet. Maybe later. Then the front plate. Fog lights ready. I had a set and he custom cut the holez my size.
The front fairlead piece. The mid part is done.
The wings are 4 or 5 pieces each. One side done.
And the other side.
That is as far as i got this day. Shell of the old bumper put back on with a few clips and a prayer until next time.
There is a front plate that goes on after some beads are layed. Then more beads and grinding and flapping.
More updates as the progress progresses.
Advocate III
Thank you for the pics! This gives me a better idea of the process.
Traveler I
Off-Road Ranger I
Finished up my sliders.. hoping to paint and attach tonight..
Member III
They look solid!! [emoji106]
Hardwired in my 1000w inverter. Mounted it under the front passenger seat, for now. I'm going to move it to the cargo area eventually but I'm still trying to figure out how i want to lay everything out first.
Installed the Prinsu non-drill rack and Heretic light bar.
And blinded my wife in the garage [emoji51]
And blinded my wife in the garage [emoji51]
Off-Road Ranger I
Got em painted and installed!! #rocksliders #bodyarmor
Advocate III
Contributor III
I put new wheels and tires last week,installed my skid plates,rock lights and spod.
Expedition Master I
- 11,455
- First Name
- Michael
- Last Name
- Lee
- Member #
13728
- Ham/GMRS Callsign
- KM6YKV
- Service Branch
- Army & Marine Corps
Took it to Hurricane, Utah for the 2019 Winter 4X4 Jamboree! Got to help @overlandbound set the booth, very nice to finally meet Michael!
Off-Road Ranger I
Awesome! I'll see you guys tomorrow!
Expedition Master I
- 11,455
- First Name
- Michael
- Last Name
- Lee
- Member #
13728
- Ham/GMRS Callsign
- KM6YKV
- Service Branch
- Army & Marine Corps
