Explorer I
- 3,680
- First Name
- Brian
- Last Name
- McGahuey
- Member #
-
23711
- Ham/GMRS Callsign
- GMRS WRMV941
Had a great day working on the trailer today.
While I was measuring the back wall in preparation to cut out the rear door, @David H was busy cutting out some of the expanded metal, so we can pass wires and water hose through the floor.
We also managed to get the stabilizer jacks mounted.
I need shorter bolts, but they're quite solid, and can easily lift the trailer off the ground.
We also managed to get ALL the panels cut out for the cabinetry. 4 sheets of 1/2 in plywood....
And the glue for the canvas dried enough to put the first coat of paint on the floor.
We should be able to get two more coats on the floor tomorrow. We also get the inner skin on the back wall, and hopefully we can flip the floor, and get the side and rear walls glued and screwed to the floor.
While I was measuring the back wall in preparation to cut out the rear door, @David H was busy cutting out some of the expanded metal, so we can pass wires and water hose through the floor.
We also managed to get the stabilizer jacks mounted.
I need shorter bolts, but they're quite solid, and can easily lift the trailer off the ground.
We also managed to get ALL the panels cut out for the cabinetry. 4 sheets of 1/2 in plywood....
And the glue for the canvas dried enough to put the first coat of paint on the floor.
We should be able to get two more coats on the floor tomorrow. We also get the inner skin on the back wall, and hopefully we can flip the floor, and get the side and rear walls glued and screwed to the floor.