Enthusiast III
The last thing I bought for the rig was wheel hubs and extended brake lines, but after my last trip it looks like I'll buying control arms, upper and lower! The front end is ready for it.
What is the last thing you bought and plan to buy?
- Thread starter [DO]Ron
- Start date
-
- Tags
- bought buy shopping list
Enthusiast III
- 2,191
- First Name
- Ken
- Last Name
- Schaffer
- Member #
14859
Hi SABJKU ,
Did call BROG to learn the secret to installing it correctly. Helpful, but why don't they include that info up front??? Wasted a lot of time for no good reason.
Look forward to making good use of it going forward.
Talk about terrific add ons, check out Front Runner Rope Light. OMG! It's fabulous.
Got mine thru Backwoods Overland, just up the road in Mt Airy, MD.
Traveler III
Glad to hear you got it all sorted.
Couldn't find that Rope Light anywhere on Front Runner.
Enthusiast III
- 2,191
- First Name
- Ken
- Last Name
- Schaffer
- Member #
14859
Call Nick at BWO.
Call Nick at BWO, 443 375 1691.
Very reasonable price and sooo flexible: dimmable, 12v plug, about 4ft of LEDs, carabiners on each end, Velcro strap on each end, Velcro straps along length (to hang from /pipe/branch), 18 ft cord to run to RTT or ground tent or wherever.
Will try to send photo of it in action after recent trip. Can't see the light itself because it's run between FR roof rack support, and it hangs just below the roof.
Attachments
Off-Road Ranger I
- 3,507
- First Name
- Mike
- Last Name
- Roots
- Member #
16968
- Ham/GMRS Callsign
- GMRS: WSGB862
- Service Branch
- USAF Spook
Traveler III
Yukon 4.88’s, some ARB diff covers and an AEV snorkel. So much nicer with the 4.88’s.
Enthusiast III
- 2,191
- First Name
- Ken
- Last Name
- Schaffer
- Member #
14859
Been tossing around the idea of a Tepui RTT. Now REI has gone and done it. 20% off one item through the 27th, plus you get you dividend next spring......so saving like $420 with no shipping cost. Making it very tough to hold off for a bit. I would need to get some sort of rack for it still and I don't think an inexpensive rack system exists out there to get me by for a while.
Traveler III
It wasn't me. I didn't trust cutting into my own hood
!I had OCD Offroad in Stafford, VA do all the work. Great group of guys, and great work! They stuck to their original quote, did a great job on the installation of everything, and finished right on time.
Member III
Influencer I
Bought a driver's side mirror for my JKUR. The original cracked somehow. When I attempted to readjust it, the darn thing came off in my hand. Replaced it and all is back to normal. I never realized how much I use that mirror until it was gone. The spare takes up a good amount of the rear view, so I use the outside mirrors more than I imagined.
I also bought an axe for when I play bush craft. It is a Hults Bruk Akka Forester's Axe. I'm pretty excited to try it out this weekend. While it will be for camping and bush craft, the axe will live in the Jeep and see off-road duty too. Woo hoo!
I also bought an axe for when I play bush craft. It is a Hults Bruk Akka Forester's Axe. I'm pretty excited to try it out this weekend. While it will be for camping and bush craft, the axe will live in the Jeep and see off-road duty too. Woo hoo!
Enthusiast III
Installed the CRDSTU rear HD coils, finally leveled out my ride.
I have Rocky Road Outfitters rocksliders and a winch bumper on the way, they should be done fabbing those in a week or so. Still need to buy a winch, but I gotta do some saving for that.
I have Rocky Road Outfitters rocksliders and a winch bumper on the way, they should be done fabbing those in a week or so. Still need to buy a winch, but I gotta do some saving for that.
Off-Road Ranger I
- 3,507
- First Name
- Mike
- Last Name
- Roots
- Member #
16968
- Ham/GMRS Callsign
- GMRS: WSGB862
- Service Branch
- USAF Spook
Member III
- 2,827
- First Name
- Jim
- Last Name
- covey sr
- Member #
16986
- Ham/GMRS Callsign
- none - BREAKER BREAKER HAND HELD CB AND WALKIE TALKIE
Just finished installing my Goose Gear rear seat delete for my 2nd Gen Tacoma Trd. So newly released that there was a slight delay in making it and no instructions to go with it. Great product and gave me tons more cargo space. 
Member III
- 2,827
- First Name
- Jim
- Last Name
- covey sr
- Member #
16986
- Ham/GMRS Callsign
- none - BREAKER BREAKER HAND HELD CB AND WALKIE TALKIE
Very nice, well organized', Is that unit made specifically for your vehicle brand or is a custom unit ?
Thank you. Specifically made for 2nd and 3rd gen Tacoma. When I got the section behind the driver side, the passenger side was still in R&D even though it was on the site for sale. I knew I wanted to do this when I got my truck but there was nothing on the market. Those covers go into the storage areas and are lockable. And has a special waterproof coating that has texture and wipes off clean. I fully insulated the back wall then installed.
