What Did You Do With Your Rig Today?

  • HTML tutorial
Mekcanix

Mekcanix

Rank V
Launch Member

Enthusiast III

2,191
Winnipeg, Manitoba, Canada
First Name
John
Last Name
McLaughlin
Member #

9656

I picked up a used truck tool box which I installed and then shortened my tonneau cover to match it up.
The purpose of this is the box will be the home for the second battery and my viair compressor
I used a 1x1 piece of tubing to pinch the canvas after cutting it

Did I mention the 1-1/2 hours of measuring to make sure I didn’t royally mess it up the tonneau or getting the courage to drill into the toolbox I just bought
Lol

It seem like it was a success
I might add it was snowing every time I was working outside
 

Attachments

  • Like
Reactions: RoarinRow, Billygoat Rocklanding, Ubiety and 1 other person
Ubiety

Ubiety

Rank VI
Member

Explorer I

5,221
Sammamish, WA, USA
First Name
Greg
Last Name
Ubiety
Member #

6193

Ham/GMRS Callsign
Ribs
Mekcanix said:
I picked up a used truck tool box which I installed and then shortened my tonneau cover to match it up.
The purpose of this is the box will be the home for the second battery and my viair compressor
I used a 1x1 piece of tubing to pinch the canvas after cutting it

Did I mention the 1-1/2 hours of measuring to make sure I didn’t royally mess it up the tonneau or getting the courage to drill into the toolbox I just bought
Lol

It seem like it was a success
I might add it was snowing every time I was working outside
Click to expand...
Love it! Great idea.
 
  • Like
Reactions: Mekcanix
afootorafloatLJ

afootorafloatLJ

Rank VIII
Launch Member
Member
Supporter

Trail Blazer I

9,574
Boise, ID, USA
First Name
Brett
Last Name
Calhoun
Member #

3984

Ham/GMRS Callsign
KK7FKK
Replaced an Automatic Transmission cable and plastic sleeves on the LJ Rubicon.
 

Attachments

  • Like
Reactions: RoarinRow, Lanlubber In Remembrance and Ubiety
Billygoat Rocklanding

Billygoat Rocklanding

Rank V
Launch Member

Explorer I

1,880
Gilbert, AZ, USA
First Name
Brad
Last Name
Mannix
Member #

5295

Mekcanix said:
I picked up a used truck tool box which I installed and then shortened my tonneau cover to match it up.
The purpose of this is the box will be the home for the second battery and my viair compressor
I used a 1x1 piece of tubing to pinch the canvas after cutting it

Did I mention the 1-1/2 hours of measuring to make sure I didn’t royally mess it up the tonneau or getting the courage to drill into the toolbox I just bought
Lol

It seem like it was a success
I might add it was snowing every time I was working outside
Click to expand...
Nice I did the same with mine on my F350. And being a Minnesota raised I know the working in the snow thing.
 
  • Like
Reactions: Mekcanix and Lanlubber In Remembrance
Ubiety

Ubiety

Rank VI
Member

Explorer I

5,221
Sammamish, WA, USA
First Name
Greg
Last Name
Ubiety
Member #

6193

Ham/GMRS Callsign
Ribs
Today is turning into "run ham radio extension cables day". Found a decent spot under driver's seat for the speaker and need to "convert" the supplied bracket to keep it from bouncing around. Ran the mic extender cable and will integrate the mic connection into the "speaker stuff" under the seat - this is how the JKU was setup and I liked it. Totally lucked out on the faceplate mount, at least a great temporary setup. Noticed the lonely unused Ram track ball and that that looked like a good enough spot for the faceplate to go in the tight-ish interior. After removing the ram ball's lego spacer the ball barely fit into the faceplate mount allowing it to be tightened to the track. I was willing to settle for much less so am pleased with the outcome for effort expended ;)

7D428D9A-2FDC-48F4-B16C-1FAAF2AB5A02_1_105_c.jpeg2A87E55D-E7D4-4480-9615-0FAC055CF634_1_105_c.jpeg
A67F981F-E76B-4364-8402-31B00BCB5FAA_1_105_c.jpeg63307C63-4564-46C1-A9CD-0914796B269F_1_105_c.jpeg
 
  • Like
Reactions: Lanlubber In Remembrance, PNWInfernoPro, El-Dracho and 1 other person
Ubiety

Ubiety

Rank VI
Member

Explorer I

5,221
Sammamish, WA, USA
First Name
Greg
Last Name
Ubiety
Member #

6193

Ham/GMRS Callsign
Ribs
Finished up the radio install for now; feels good to have a workable radio again! Turned the external speaker bracket into "custom under seat brackets" and the speaker is now locked into the seat forward/back adjustment lever - taking up otherwise wasted space and audio seems fine. Mic cable ran and the little block is wedged in pretty well but will probably add a zip tie.

1B37C40C-A8F0-432D-B2A1-B6BE0225A7FD_1_105_c.jpeg790A7BF7-00C7-41D9-BB58-E093FCEB3C52_1_105_c.jpegE224AC65-4221-4D60-942F-4F34BBC6B8C7_1_105_c.jpegCED7C998-E0CC-4731-A033-39D667D85009_1_105_c.jpegF4DAD088-A9EA-4B89-89D9-8D684B223F0D_1_105_c.jpeg
 
  • Like
Reactions: Lanlubber In Remembrance, PNWInfernoPro, El-Dracho and 1 other person
Stantonfamilytruckster

Stantonfamilytruckster

Rank IV
Member

Enthusiast I

968
Breinigsville, Pennsylvania, United States
First Name
Jim
Last Name
Stanton
Member #

25164

Went trick or treating with the family but stopped by a local area that’s fun to take the kids fishing. Somewhere quiet.
 

Attachments

  • Like
Reactions: OverLamb24, RoarinRow, Lanlubber In Remembrance and 1 other person
PonoAdventures

PonoAdventures

Rank IV
Launch Member

Advocate I

1,308
Orange County, CA
First Name
Jason
Last Name
Nguyen
Member #

22713

Finished up the Cathedrals Valley Road at Capitol Reef. The rangers said that the road was impassable due due to deep sand and 4WD we’re getting stuck, but I assumed it was people who were unprepared or never off road before. Glad I did it.
 

Attachments

  • Like
Reactions: LanderGoat, 472HemiGTX, Paula - Canadian Explorer and 6 others
U

USStrongman

Rank V

Influencer II

1,596
Lubbock, TX, USA
First Name
Bryan
Last Name
Hildebrand
Member #

20099

Pulled the roof rack off for some functional changes. I have loaded the bins on the back every trip think it is contributing to some sagging once fully loaded. I am moving my mounting points forward, my Max Trax to the back to better place weight towards the center. I am also adding a mesh flooring in place of the sheet metal flooring I had put in the back half. The metal was thick enough to hold weight, but thin enough it really grew and shrunk with temperature changes. Summer was fine as it stretched itself out. When cold, it pulled back some and would vibrate in certain conditions. I will make sure it has a wider 1/2" gap around the radius to eliminate the vibration. Did some grinding of some rusting spots and am painting it later today. Forgot how heavy that damn thing is!
 
  • Like
Reactions: Novax326, RoarinRow, Lanlubber In Remembrance and 1 other person
Sparksalot

Sparksalot

Rank VI
Launch Member

Influencer III

4,312
Bastrop County, TX, USA
First Name
Rex
Last Name
Drake
Member #

19540

Ham/GMRS Callsign
KI5GH
Service Branch
Air Force
Changed the switch for the hatch glass release. Oy vey.

also started brainstorming ideas for a platform and storage now that the rear seat is gone. A pair of howitzer shell Ammo cans will fit back to back and be even with the top of the Frontrunner water tank.
 

Attachments

  • Like
Reactions: RoarinRow, Lanlubber In Remembrance and Ubiety
millerm217

millerm217

Rank IV

Explorer I

1,116
Hermosa Beach
First Name
Mike
Last Name
Miller
Member #

27607

Ham/GMRS Callsign
kn6fqf
Got my new Iceco fridge and Jackery battery combo set up. Both were on sale when I bought them. I left the fridge in the rig for about 5 hours and it only used 10% of the battery. Not a scientific test, but I should be fine when parked for the night. Also, got a new Wavian gas can to replace my jerry can that was lost around mile 50 of the mojave road.

PXL_20201031_185640622.jpg
 
  • Like
Reactions: PNWInfernoPro, Paula - Canadian Explorer, Novax326 and 4 others
You must log in or register to reply here.
Top Bottom