What Did You Do With Your Rig Today?

What $10 on the Wish app at 3AM gets you... TRD headrests, belt pads, and seat crevice thingers.

i-8M5G6TG-X2.jpg


i-NQ4cjcQ-X2.jpg


Plus some center console molle panels (fenderbraces.com). Ham radio will mount where the tissue box currently is.

i-QCDpPjc-X2.jpg


i-KKpk2w9-X2.jpg


Rip-away trauma kit.

i-s4HG46W-X2.jpg


Installed the front bed-rail that Toyota should've shipped with from the factory in the first place.

i-dt6KGbN-X2.jpg
 
  • Like
Reactions: YPD1, HappyOurOverlanding and Road
Road said:
Ha! That's so cool, packing up all the kids and hitting the beach. Cute images. The kid that seemed the most excited in the car was the first to zonk right out. You've got your own squad to teach, so they can help you with everything as they grow up!
Click to expand...

Can’t wait until they’re out of car seats!! Most tedious part is moving all of them from the minivan to the 4RUNNER and back when the fun is over!


Sent from my iPhone using Tapatalk
 
Last edited:
  • Like
Reactions: Road
Well I got stuck! Went out to check on one of our campsites with one of my staff and WOW too much snow. About 2 feet of settled snow and the 6 inches we got on Monday and Tuesday. Made it in OK but when trying to turn around it was a no go - high centered. A bit of shoveling by Len and I to clear out the wheels, set the Max Trax and crawled up and out. Be a while before we get into that site.
 
  • Like
Reactions: HappyOurOverlanding and Road
Should wait tell I have picture to post, but here goes anyway. I was at my local junkyard to buy a part for my Nissan Pathfinder. They did not have the part I needed. On my way out the door I spotted a set of 4 Wild Country TXRs in 32 x 11.5 x 15s, for $300. out the door. They have about 50% wear left on them. Side walls looked good, so I will give them a try. This will be a good test on my new gearing without making a mistake in tire size, on new tires! Benz.
 
  • Like
Reactions: WJ - Firefly
tsteb112 said:
Almost done. There’s a meet and greet Saturday so it’s going to be done by then. It’ll still need paint but it’ll be done.
9e099d69164437bd366bd53edd5d49d8.jpg
d75e01eb726a30dc0a22cca2bd8f307d.jpg
5646d57fc60bb32470b1ab84f02a6116.jpg
8fb216cff0c499fd8c735f5e44874504.jpg
6a606f863f942482ee7686b309a4a3d9.jpg
47e7652904cdd107352af084db6dba63.jpg



Sent from my iPhone using Tapatalk
Click to expand...

Hey now...you're covering up the Scuba sticker. :screamcat: and one other thing...how fast can you get to Reno to build me one. :tonguewink::tearsofjoy::sunglasses:
 
ScorpioVI said:
Are those strong enough to hold +/- 35lbs? No roof rack?
Click to expand...

Not sure but my guess would be no from what I know about the Toyota bolts.

I do have a roof rack but my hard-shell RTT fits completely from side edge to side edge (K9 rack). I've been looking for a fastening system for the K9 that does not require bolting from the top since the RTT would sit on the bolt heads (not good for fiberglass).

If I can find something that works then that will answer my mounting needs for this product on one side and an awning on the other. Oh Me, oh my... what's an overlander to do. :weary::sunglasses:
 
  • Like
Reactions: ScorpioVI
Alright it’s all done minus the highlift rack and paint. It bolts on the left and right sides under the taillights through nutserts. We used 5/16” bolts. 3 on the passenger side, 2 on the driver due to interference issues. The bottom are 9/16” bolts I believe and there are 4 that tie into the hitch. It doesn’t move at all. I’m ecstatic and can’t wait to clean it up and get it painted.
6a0acb51cee09d79f84669e65f8aff22.jpg
1e79d68321739286662da55a8892302d.jpg
532d569e465488d7f2576e1ccb74c547.jpg



Sent from my iPhone using Tapatalk
 
  • Like
Reactions: Leclerc.27, Nikosan, WJ - Firefly and 2 others
You must log in or register to reply here.
Top Bottom