Influencer I
Just got caught up on your sweet build. Looking awesome!
-
Guest, UPDATE We went through the site migration runbook and completed all steps. We will need to complete the migration next week, but will leave the forums up for the weekend. A few days after maintenance, a major upgrade revision to the forum site will occur.
-
OverlandLexusTN's GX470 Build
- Thread starter MagnoliaOverland
- Start date
Traveler III
Yea it did. I removed the running boards then trimmed a small piece off the forward edge to place back on and help clean it up a bit.
Traveler III
Got my new FJ Cruiser wheels on this weekend. These are a perfect fit for the GX as they look good and help gain 15mm of offset back. The stance is so much better. They will eventually be powder coated somewhere between hyper silver and black but they'll stay aluminum for awhile at least.
chris filippi
Rank 0
Traveler I
I am considering GX470 and looking now so I appreciate your efforts in posting your experiences.
B_the_GXdude
Rank VI
Off-Road Ranger III
Such awesome rigs!! Comfortable as hell and capable!!!! Great combo! Hahah beautiful rig man, be ready to see her 100% finished!!
Sent from my iPhone using OB Talk
Sent from my iPhone using OB Talk
Traveler III
It was probably me or my wife. We both work in Brentwood but I let her drive it 90% of the time as she works from home mostly. Trying to keep the wear and tear down. I don't have a RTT but have foxwing awning and the gxor sticker in that place.
Thanks! The stance and look has really improved since I threw on the FJ cruiser wheels. Next step will be slightly more lift in the front and 285's
Enthusiast III
This is a very nice build.
I am also looking at doing a suspension upgrade since the rear shocks/dampers have all but failed. Surprisingly, the airbags at 165000 miles are still doing fine. That said, I have decided to do the conversion, and will be going for the OME kit.
Bilsteins look interesting, but I believe the ride is a bit harder, right?
I plan to lift a little bit so that 255/75r17 can fit.
I really want the 255/80r17, but there are too few options in that range. Any pointers and suggestions regarding tire sizes. Do not want to go wider due to fuel economy, and most of the "overland" stuff will be on snow and trails anyways!
I am also looking at doing a suspension upgrade since the rear shocks/dampers have all but failed. Surprisingly, the airbags at 165000 miles are still doing fine. That said, I have decided to do the conversion, and will be going for the OME kit.
Bilsteins look interesting, but I believe the ride is a bit harder, right?
I plan to lift a little bit so that 255/75r17 can fit.
I really want the 255/80r17, but there are too few options in that range. Any pointers and suggestions regarding tire sizes. Do not want to go wider due to fuel economy, and most of the "overland" stuff will be on snow and trails anyways!
Mima
Rank IV
Enthusiast III
I run Toyo Open Country AT 2's in 255/80r17 on stock wheels and am extremely happy. Quiet, smooth, and plenty of traction. She also sits on a Toytec Boss 2.5 lift.
Attachments
Traveler I
New to Overland Bound! I just joined. I am starting a GX470 build and found this thread. Looking good. I am in Nashville. If you are free for coffee one day, I would like to see your GX
Enthusiast II
Always been a fan on the 470 builds keep up the great work! Any plans on rock sliders? Apologies if you stated this prior.
Traveler I
Updates please?
ConcordCarlos
Rank 0
Traveler I
Would you mind posting a picture or two of the ditch light brackets where they mount under the hood? I have a pair and it seems that the bolt pattern of the hood bracket just doesn’t match the bracket bolts.
QUOTE="OverlandLexusAL, post: 108205, member: 8187"]Installed CBI Fabrication ditch light brackets and a pair of Rigid Duallys (Flood). There were a few wiring gremlins but about 6 fuses later they are working great.
Can you post a picture or two of the bracket attached to the hood support? I have a pair of the
Sent from my iPhone using OB Talk[/QUOTE]
QUOTE="OverlandLexusAL, post: 108205, member: 8187"]Installed CBI Fabrication ditch light brackets and a pair of Rigid Duallys (Flood). There were a few wiring gremlins but about 6 fuses later they are working great.
Can you post a picture or two of the bracket attached to the hood support? I have a pair of the
Sent from my iPhone using OB Talk[/QUOTE]
can you post a picture of how the ditch brackets mount under the hood?Installed CBI Fabrication ditch light brackets and a pair of Rigid Duallys (Flood). There were a few wiring gremlins but about 6 fuses later they are working great.
Sent from my iPhone using OB Talk
