Member III
- 2,771
- First Name
- Rolando
- Last Name
- Nispiros
- Member #
17011
- Ham/GMRS Callsign
- KN6JJS
Which is exactly why I wanted one. If I ever have to use it I don't wanna have to mess around, as I'm sure timing will be everything.
What is the last thing you bought and plan to buy?
- Thread starter [DO]Ron
- Start date
-
- Tags
- bought buy shopping list
Member III
- 2,827
- First Name
- Jim
- Last Name
- covey sr
- Member #
16986
- Ham/GMRS Callsign
- none - BREAKER BREAKER HAND HELD CB AND WALKIE TALKIE
What is the brand ? How much did it cost ? Where did you get her ? Is she a goodun ?
Advocate I
Can I also recommend this: I'm often changing somebody else's wheel/tire, so the different sizes are handy. What I like about this setup is the open space in the case:
I keep a long 1/2 drive impact extension and a torque-stick in there. Super handy to have everything I need to swap wheels and actually torque them properly.
-TJ
Enthusiast III
i ordered the shovel from Sharper Image...it was "overland approved", so of course it cost more.
the head is made from recycled jeep frames, so i had it clear coated and permanently mounted to the cargo basket.
after sitting in the sun for a couple hours, the little badge fell off though
Last edited:
Member III
- 2,771
- First Name
- Rolando
- Last Name
- Nispiros
- Member #
17011
- Ham/GMRS Callsign
- KN6JJS
Thanks, yep I've already got a similar set that I used on my track car. I just re-tested to make sure that the sizes I have fit my new drill thingy.
Advocate III
Just bought and added side and back JCR Molle Panels to the Gladiator. Love them, makes a nice place to strap my shovel, axe, traction boards. '
Advocate I
Member III
- 2,771
- First Name
- Rolando
- Last Name
- Nispiros
- Member #
17011
- Ham/GMRS Callsign
- KN6JJS
Had to keep the one lug with me when checking the torque before races.
naysjp
Rank III
Enthusiast III
Okay. Those fixtures look sharp. What a way to utilize that area in the middle of the dash. Did you make those arms and knobs with a lathe? Looks sharp.
Enthusiast III
Bash Brothers Overland
Rank V
Advocate III
- 1,744
- First Name
- Jasen
- Last Name
- Ulmer
- Member #
26569
- Ham/GMRS Callsign
- KD9HBC
Member III
- 2,827
- First Name
- Jim
- Last Name
- covey sr
- Member #
16986
- Ham/GMRS Callsign
- none - BREAKER BREAKER HAND HELD CB AND WALKIE TALKIE
What kinda race cars are you two talking about. Most of my equipment came from my circle track racing days.
Member III
- 2,771
- First Name
- Rolando
- Last Name
- Nispiros
- Member #
17011
- Ham/GMRS Callsign
- KN6JJS
Just a modified street car. Nothing special.
Attachments
Bash Brothers Overland
Rank V
Advocate III
- 1,744
- First Name
- Jasen
- Last Name
- Ulmer
- Member #
26569
- Ham/GMRS Callsign
- KD9HBC
Two new front seats, grab handlos, ram mount, rollbar bags, on board air, and tire carrier cargo rack. Next, dual battery and a fridge. Then, Mama says I am done for a while.
Traveler III
- 1,747
- First Name
- Chris
- Last Name
- March
- Member #
22057
- Service Branch
- Army Airborne Ranger
Replaced front grill and front ambers on bumper :D
Adding a set of ambers to the roof rack on rear.
Adding a set of ambers to the roof rack on rear.
Member III
- 2,827
- First Name
- Jim
- Last Name
- covey sr
- Member #
16986
- Ham/GMRS Callsign
- none - BREAKER BREAKER HAND HELD CB AND WALKIE TALKIE
What a nice race car. Is it set up for road racing or circle track. I'm a big fan of all type of racing. I think building them is my biggest niche. All my racing experience is on dirt track and off road.
I'm too old now but that is where my heart is.
Member III
Just ordered a Metalcloak 3.5" lift... Next is going to be a Dometic CFX 55IM once REI kicks out my dividend.
Traveler III
- 2,105
- First Name
- John
- Last Name
- Boucher
- Member #
14789
- Service Branch
- Retired USN
Apparently, my "WIFE" is buying a winch for the H2 this past weekend with the heavy Ice storm we were out clearing trees in our driveway and public roads with me cutting them and her pulling them back with the H2. Out of the blue ...her words " why don't you have one of those pulling things on the front of the h2 like the land cruiser". I just said it is on the list but not a priority well she says that will be your Valentine's day present then. Guess she had fun
Ordered and installed a Redarc Brake controller in anticipation of our InTech Pursue trailer. 
