Enthusiast III
Maybe....
Purchased the welder. Next purchase is oxyacetylene and 75/25 gas. Not gonna have much to post for a while. I expect a couple 3 or 4 months for me to build the bed in my off time.
-
Guest, UPDATE We went through the site migration runbook and completed all steps. We will need to complete the migration next week, but will leave the forums up for the weekend. A few days after maintenance, a major upgrade revision to the forum site will occur.
-
What is the last thing you bought and plan to buy?
- Thread starter [DO]Ron
- Start date
-
- Tags
- bought buy shopping list
Purchased the welder. Next purchase is oxyacetylene and 75/25 gas. Not gonna have much to post for a while. I expect a couple 3 or 4 months for me to build the bed in my off time.
Member III
I just purchased the Anytime Backup Camera Full Kit.
View attachment 134037
Anytime Backup and Front Camera Kit (2014 to 2019)
Download Installation Instructions Here View your Factory Backup camera at anytime PLUS add a Front facing camera to view at anytime! Our Anytime Backup and Front Camera kits allow you to view your rear camera at any time AND add a front facing camera. The harnesses will plug directly into the...
www.anytimebackupcamera.com
View attachment 134037
Member II
Expedition Master III
Just bought my BIL and Sister, 2 sets for Christmas. Twice they could have used a pair for a full-size F-250 4x4.
Member II
Member III
Just ordered an EAG roof rack for my jeep, along with some mounts for rotopax fuel cans.
Plan to get many items...
Wheels
Lift kit
Bumpers
Snorkel intake
Plan to get many items...
Wheels
Lift kit
Bumpers
Snorkel intake
Expedition Master III
Say it is not true.......
There was some awesome deals last October and November, on the X-Bull clones on E-bay. I just wished the mounting systems for them had also been put on sale. At one point you could almost buy 2 sets of boards, for the cost of 1 mounting pin setup (need 2), for 1 set of boards. If you wanted the TRED professional version. The older standard TRED version, was not much cheaper.I got the Orcish version that came with bags and tethers. I want to make/buy a mounting platform, for at least 1 set, while keeping the other set, in their bag to use if neccessary.
Alertchief
Rank V
Advocate III
Installing ARb dual air compressor, dual batteries and artec bumpers this weekend. Merry xmas lol
Member II
I bought some hub-centric 30mm (1.18") wheel spacers (My truck will break in half and I will die - I know) and some patches with which to kick off my planned patch-covered headliner. I have the spacers already, but the patches are still in transit. Also waiting on the torque wrench I ordered to arrive before installing the spacers.
Member III
Spacers are fine as long as they are in the 1" to 1 1/2" range, and they are properly installed and torqued then driven on and re torqued for safety sake. More important is to maintain the wheel back spacing as much as possible so as not to have tire rubbing with bigger tires.
Advocate I
Today's payday, so I just hit the go button on a 7 blade fan, belt tensioner, engine mounts, and variable speed fan controller. Once these parts arrive, the last part I convinced myself I need for this project is the headlight support panel (next paycheck hopefully). I figure when I start the project I will lay out all the WJ cooling mod parts I decided I "needed" on the patio and post a pic and list on my build thread. Or maybe I don't want to know.....
Member III
Now you have a basket for your baby !! Don't forget the ratchet straps and welding goggles !
Member III
I was somewhat kidding, but I did get rock lights just for the fun of it. I need / am waiting for extensions because the lights did not have long enough cords to get to the front of the rig. Some I'm a 1/3 done.
Member III
Aint them purdy ! You in da red lite district now ! :-o
