I'm about to pop out my rear tail light.... Get out the Dremel.... And see how I'm going to mount this CB Antenna....
(the wife says I've got 45 minutes...)
(the wife says I've got 45 minutes...)
What Did You Do With Your Rig Today?
- Thread starter iamout
- Start date
Advocate II
Traveler III
- 4,002
- First Name
- Kelly
- Last Name
- Herrin
- Member #
2032
- Ham/GMRS Callsign
- KFØDEX
Pathfinder I
Installed the AEV drop bracket kit. Seems to make a world of difference compared to running no bracket. Puts the geometry back to stock :) I'm just glad to be done with suspension work for a while haha. Plus it sucks laying on the ground by yourself with no one to suffer with. Lol
Pathfinder I
Today had universal tracks/rails put on the canopy for the inevitable roof rack/awning.....(snorkel is in and install is 11/19).....
My wife is calling my truck "Winchester House" -- could it be the never ending project??? [emoji33]
My wife is calling my truck "Winchester House" -- could it be the never ending project??? [emoji33]
Pathfinder I
Sorry....that sucks hard!! Hope nothing was taken. A sense of being violated I know....hope insurance covers & down time is minimal....
Traveler III
- 4,002
- First Name
- Kelly
- Last Name
- Herrin
- Member #
2032
- Ham/GMRS Callsign
- KFØDEX
This was me last Monday, when the mechanic said my entire cooling system was rusted out and it would be $1800...
Back on the road today! "Water (rusty) Under the Bridge" :-)
Last edited:
Pathfinder I
Enthusiast III
Got around to cleaning and reseating an abs sensor and installing the new rear pads... Oh, and the obligatory add-oil-its-a-rover ;-)
Influencer I
I climb my lazy butt into my truck and drove up to
AND GOT TO DO THIS.[emoji197] [emoji197] [emoji197] [emoji197] [emoji199] [emoji199] [emoji199] [emoji199] [emoji2] [emoji2] [emoji2] [emoji2] [emoji2] [emoji2] [emoji2] [emoji2]
AND GOT TO DO THIS.[emoji197] [emoji197] [emoji197] [emoji197] [emoji199] [emoji199] [emoji199] [emoji199] [emoji2] [emoji2] [emoji2] [emoji2] [emoji2] [emoji2] [emoji2] [emoji2]
Last edited:
Advocate II
Man that's awesome!!!!! Lol it would be awesome if they would stay like that size and have him or her as a pet.
Threw a snorkel on tonight [emoji1598]
Jealous!!!!I climb my lazy butt into my truck and drove up to
AND GOT TO DO THIS.[emoji197] [emoji197] [emoji197] [emoji197] [emoji199] [emoji199] [emoji199] [emoji199] [emoji2] [emoji2] [emoji2] [emoji2] [emoji2] [emoji2] [emoji2] [emoji2]
Token IG screenshot, mounted the rear awning to the platform tray,
Had to fab up 1" spacers for clearance and bend brackets to compensate for angle when trays up all the way.
1.4m (W) x 2.0m (L)
Had to fab up 1" spacers for clearance and bend brackets to compensate for angle when trays up all the way.
1.4m (W) x 2.0m (L)
Traveler III
- 4,002
- First Name
- Kelly
- Last Name
- Herrin
- Member #
2032
- Ham/GMRS Callsign
- KFØDEX
I don't know,... she's got that "Have your fun big man. In two years, you're lunch" look on her face ;-)
Last edited:
tomwill55 from fjcruiserforums site attended the South East Expo Overland a few weeks back, and he sent me a few patches.
At the top is South West Expo, Blue Ridge Overland Gear, and LTWK Knives.
The bottom one commemorates Expedition Overlands Mackenzie's three part video series they just did on YouTube a few weeks back.
That patch is available from Triple Aught Design, and I just bought that last week.
I am using a Canon Rebel T51 DSLR camera with a Canon 18-135 mm lens, and it is getting harder to capture the patches on the headliner.
Any suggestions for a Canon lens that will give me a wider field of view when in a rig and closeup to the headliner?
I wanted to redo my NVIDIA Shield Android tablet install that I am running Back Country Navigator on, but the weather has not been the best for working outside.
I need to mount the RAM mount to the side of the dash, maybe next weekend.
At the top is South West Expo, Blue Ridge Overland Gear, and LTWK Knives.
The bottom one commemorates Expedition Overlands Mackenzie's three part video series they just did on YouTube a few weeks back.
That patch is available from Triple Aught Design, and I just bought that last week.
I am using a Canon Rebel T51 DSLR camera with a Canon 18-135 mm lens, and it is getting harder to capture the patches on the headliner.
Any suggestions for a Canon lens that will give me a wider field of view when in a rig and closeup to the headliner?
I wanted to redo my NVIDIA Shield Android tablet install that I am running Back Country Navigator on, but the weather has not been the best for working outside.
I need to mount the RAM mount to the side of the dash, maybe next weekend.
Traveler III
- 4,002
- First Name
- Kelly
- Last Name
- Herrin
- Member #
2032
- Ham/GMRS Callsign
- KFØDEX
Great!!! Now I have to replace my headliner (velcro won't stick ;-)
Advocate II
tomwill55 from fjcruiserforums site attended the South East Expo Overland a few weeks back, and he sent me a few patches.
At the top is South West Expo, Blue Ridge Overland Gear, and LTWK Knives.
The bottom one commemorates Expedition Overlands Mackenzie's three part video series they just did on YouTube a few weeks back.
That patch is available from Triple Aught Design, and I just bought that last week.
I am using a Canon Rebel T51 DSLR camera with a Canon 18-135 mm lens, and it is getting harder to capture the patches on the headliner.
Any suggestions for a Canon lens that will give me a wider field of view when in a rig and closeup to the headliner?
I wanted to redo my NVIDIA Shield Android tablet install that I am running Back Country Navigator on, but the weather has not been the best for working outside.
I need to mount the RAM mount to the side of the dash, maybe next weekend.
They are all sweet looking patches. We're did you buy the blue ridge overlandn patch. Thanks
Pathfinder I
tomwill55 from fjcruiserforums site attended the South East Expo Overland a few weeks back, and he sent me a few patches.
At the top is South West Expo, Blue Ridge Overland Gear, and LTWK Knives.
The bottom one commemorates Expedition Overlands Mackenzie's three part video series they just did on YouTube a few weeks back.
That patch is available from Triple Aught Design, and I just bought that last week.
I am using a Canon Rebel T51 DSLR camera with a Canon 18-135 mm lens, and it is getting harder to capture the patches on the headliner.
Any suggestions for a Canon lens that will give me a wider field of view when in a rig and closeup to the headliner?
I wanted to redo my NVIDIA Shield Android tablet install that I am running Back Country Navigator on, but the weather has not been the best for working outside.
I need to mount the RAM mount to the side of the dash, maybe next weekend.
Quite right about the lens. I am thinking about putting my Canon 10-22 on the console and setting the timer and letting it get the whole roof portion and all the patches. Thanks for the heads up on the TAD patch -- just ordered two!! I got burned last time and thought I would wait on the other TAD XO patch and lost out..... ;-(
