Creator III
- 5,660
- First Name
- Jason
- Last Name
- Shelby
- Member #
6080
- Service Branch
- TN National Guard
Jeep does stand for Just Empty Every Pocket! LOL
About $1500 worth
What is the last thing you bought and plan to buy?
- Thread starter [DO]Ron
- Start date
-
- Tags
- bought buy shopping list
About $1500 worth
Enthusiast III
- 1,394
- First Name
- Rick
- Last Name
- Iverson
- Member #
16745
- Ham/GMRS Callsign
- W7NB
- Service Branch
- Army
Finished installing the Retrax Pro XR tonneau cover with my Yakima Outpost rack and RTT. FINALLY dry and secure.
Next up will be some kind of awning.
Next up will be some kind of awning.
Member III
- 2,771
- First Name
- Rolando
- Last Name
- Nispiros
- Member #
17011
- Ham/GMRS Callsign
- KN6JJS
Enthusiast III
- 1,394
- First Name
- Rick
- Last Name
- Iverson
- Member #
16745
- Ham/GMRS Callsign
- W7NB
- Service Branch
- Army
Really though about this before I went with the Retrax/Yakima combo. Wanted the organization but didn't want to give up the bed space.
Enthusiast II
It was definitely a compromise for me to go this route. Time will tell. I like your set up. Cheers
My last purchase was my RTT. I need to build a full length rack to replace the factory rails and Yakima rack. I think the next purchase will be a front bumper insert so I can mount a winch.
Enthusiast III
Not much needed here, just more gas to get me here to there and back
Member III
- 2,827
- First Name
- Jim
- Last Name
- covey sr
- Member #
16986
- Ham/GMRS Callsign
- none - BREAKER BREAKER HAND HELD CB AND WALKIE TALKIE
That's not too bad for all your getting. The same thing for my rig would cost another g.
Creator III
- 5,660
- First Name
- Jason
- Last Name
- Shelby
- Member #
6080
- Service Branch
- TN National Guard
Influencer II
Tie rod end and adjuster sleeve...
The old ones decided that they want to stay together forever and since my track is a bit off (toe out) since we changed the balljoints it's time to get it aligned properly after the suspension install.
The old ones decided that they want to stay together forever and since my track is a bit off (toe out) since we changed the balljoints it's time to get it aligned properly after the suspension install.
Contributor II
I bought a thermostat and radiator Hoses. Next driving lights
Enthusiast III
Enthusiast III
Truck goes in the shop tomorrow. Hydraulic power steering assist.
Last thing I bought was a set of LoD Destroyer rock sliders to replace the stock rock rails on my Rubicon. Need something functional and with a step for my wife; she already fell once trying to get in and we don't need that to happen again. Next purchase I'm not sure. Thinking maybe a full set of skid plates.
Enthusiast III
I bought 2x 120amp Lithium Batteries, a lithium DC to DC charger and 330w solar panel and onboard air.
Next items are new 35 tyres and a scanguage.
MG
Next items are new 35 tyres and a scanguage.
MG
Pathfinder I
I got a 3 in lift and 17 in tires 
Enthusiast III
Member III
- 2,771
- First Name
- Rolando
- Last Name
- Nispiros
- Member #
17011
- Ham/GMRS Callsign
- KN6JJS
Nice gadgets! I have the Scanguage II. When you get it, you can register it online and check for firmware updates. If there is a firmware update available, you can send it in to them to have it done. I believe there was a small cost for it and turn around time was in a few days to a week including delivery time.
Member III
Firestone airbags with Daystar cradles. No more rear sag!!
Member III
- 2,771
- First Name
- Rolando
- Last Name
- Nispiros
- Member #
17011
- Ham/GMRS Callsign
- KN6JJS
That's gonna be nice. I addressed my sag with an add-a-leaf kit.
