Member II
What Did You Do With Your Rig Today?
- Thread starter iamout
- Start date
Influencer I
Member III
I picked up my son from kindergarten... that's all. [emoji12]
Rustyburbin from SoCal 5 kids, wife, dog and a 1970 K20 Suburban
Rustyburbin from SoCal 5 kids, wife, dog and a 1970 K20 Suburban
Advocate II
Drove it to Dirty Parts and didn't spend any money!!!
I was just there to trade in a dysfunctional ARB Tire Deflator that had a slight bend in the piston rod (Found that out comparing it to @FrankRoams identical deflator).
I was just there to trade in a dysfunctional ARB Tire Deflator that had a slight bend in the piston rod (Found that out comparing it to @FrankRoams identical deflator).
Member II
Advocate II
Sadly, that one closed down. Wish it didn't, it's FAR closer, and with way less traffic.
This location is in Culver City.
Member II
Off-Road Ranger I
Finally received and mounted up the ARQ270 awning. It's actually bigger than I expected, but you certainly get what you pay for here. This ain't no Eezi-Awn. But it will do fine for my needs.
Man I like that blue, its the same color I got mine in. Getting excited as I expect a call from DHL shortly...
I'm getting steps tomorrow. Wait, wrong thread.
This belongs in the "What are you doing to your rig tomorrow?" thread............................
This belongs in the "What are you doing to your rig tomorrow?" thread............................
Pathfinder III
Once I cranked them back down and dialled them in I would say they are a big improvement. That's saying a lot because I was really happy with the original Bilstein shocks that came with the Xterra Off-Road.
Lean from my mistake. Install them and try them out first. Then adjust from there. I made a bad assumption and cranked mine way up. Not a huge deal but it did cost me time and frustration. [emoji12]
Sent from my XT1650 using OB Talk mobile app
Pathfinder III
Traveler III
- 4,002
- First Name
- Kelly
- Last Name
- Herrin
- Member #
2032
- Ham/GMRS Callsign
- KFØDEX
Advocate II
Installed an ARQ90 awning. Still gonna need to reinforce the floating end to stabilize it when it's open. Right now it twists the frame a bit and dips that rear corner. For now, I'll use it with an upright or two on the ends, until I finalize some sort of brace.
-CP TACO
OB #2376
-CP TACO
OB #2376
Member III
Cell phone booster? ... do tell.
Rustyburbin from SoCal 5 kids, wife, dog and a 1970 K20 Suburban
Off-Road Ranger I
Finished packing the trailer and getting the fig ready for a 4 day trip! Tomorrow is going to be a long day at work..LOL!
Sent from my SPH-L720T using OB Talk mobile app
Sent from my SPH-L720T using OB Talk mobile app
Pathfinder I
Well its been a busy week with a 3 prong attack. Firstly my Landrover 300 tdi after cutting out the rust worm in the lower half of my crossmember, with the tank out clean the inside of the chassis and painted, replaced the rear copper brake pipes, clean down the axle and painted, cleaned and painted the diff guard. This week end will be rebuilding the back end weld crossmember in and painting, fitting new HD rear bumper, new tank guard, nato hitch, lights and rewiring the towing electrics.
Secondly my Landrover td5 was due a service now done.
Thirdly I continued stripping and rebuilding my Sankey trailer ready to start a expedition build on it in a few weeks time.
Secondly my Landrover td5 was due a service now done.
Thirdly I continued stripping and rebuilding my Sankey trailer ready to start a expedition build on it in a few weeks time.
