What Did You Do With Your Rig Today?

[Outdoordog]

Finally setup my roofrack and solar panel.
Was about to wire them today, but the RV cable sealer i got was too poorly made, so I have to return it and order a different one.

 

[highboy4x4]

Take a look at a Milton Valve. It is a valve stem remover/bypass air chuck. I sort of disagree with another member that it drastically increases your fill rate of your tire. Does it go faster but not a lot. Yes the valve stem reduces the inlet volume but we are talking seconds not minutes. Here is the link and there is a guy on YouTube that timed it and he only gained 15 seconds with the Milton valve.

Amazon.com

The test starts around the 26 minute mark.

Tested out the new dual hose, and they work fantastic! Cut down on filling time by a lot! Usually I'm last to fill (since I'm on 38x13.5x17), but I finished earlier than everyone last time we went wheeling. Very happy with my setup.

Did you change the hose and fitting sizes? I still want to tap out to 1/4. I purchased a premade 4 tire hose and I’m thinking that was a mistake. Yeah I think I will be last to fill up with 35x11x20s until I dial it in. The first test was not good hence my questioning the fitting/hose size. So much for “on the cheap.”

 

[highboy4x4]

Made from scratch a box corner cushion with 2” memory foam to use as a sleeping pad!
www.sailrite.com made it look easy! Recommended web site!

 

[Outdoordog]

Did you change the hose and fitting sizes? I still want to tap out to 1/4. I purchased a premade 4 tire hose and I’m thinking that was a mistake. Yeah I think I will be last to fill up with 35x11x20s until I dial it in. The first test was not good hence my questioning the fitting/hose size. So much for “on the cheap.”

Yeah, went to 1/4 from 3/8 and didn't seem to affect the flow at all.

 

[Dimitri_Raptis]

Added the iKamper Roof Top Tent

 

[jeepman]

Not today but first time I had a chance to get pics. RotoPax/Jerry Can mounts. I chose to go with RotoPax but Jerry Can was an option. @crossbridges_overland

 

[roots66]

My wife drove me to go pick up this.

 

[highboy4x4]

My wife drove me to go pick up this.

View attachment 290255

Which one??

 

[roots66]

My wife drove me to go pick up this.

View attachment 290255

Which one??

She drove the Collie to get the Bronco.

 

[highboy4x4]

Final disassembly and glueing of the center cabinet!

 

[roots66]

Removed the basket and all the associated containers from the Collie so my wife can see out the back window. Looks so naked now.

 

[roots66]

First mod. Flip the spare and add nearly all the gear from the Collie boxes.



Everything fits with the floor cover back in place.

 

[Woodman]

Rear seat delete finally carpeted and finished. Just in time for a trip

 

[JakeHalloran]

Installing an ARB bumper and Smitty 10k winch today. Thank goodness for the work truck, I definitely couldn't lift it into place on my own

 

[reaver]

Built a rack for my fridge box on the trailer, and mounted a dewalt box I had laying around up there for some weatherproof storage.

I also installed a port on the side of the trailer so that I can use the diesel heater without putting the ducting to the window.

 

[Jaytperry89]

I did some vehicle maintenance this last weekend, 4 of the 7 offroad lights on my rig had moisture behind the lenses, and my air filter needed cleaned, I also added a phone mount, and some decals to my rig my brother made for me.

 

[roots66]

Made it official...at least until I order a second medallion.

 

[El-Dracho]

Made it official...at least until I order a second medallion.

Awesome.

 

[Mojavewanderer]

 

[Blu12T]

View attachment 290541

How beautiful is that!