What Did You Do With Your Rig Today?

[dp454so]

I finally got a campershell. Ordered it a couple of months ago but evidently the supply chain issues are still a thing....pretty happy with it. Now to just get it set up for hauling bikes/gear.

What make/model did you go with? I"m also in the market.

 

[rzims]

I went with the Leer 100R
The fit and finish seems pretty nice, I had them install the roof rails, but haven't worked out the rack part yet. I have an older Thule set of mounts and cross rails that I hope will fit, but haven't had a chance to try it yet.
My last truck was an 05 f150 and the Leer I put on that was like 1500.00....this was about double that....ouch

 

[North American Sojourner]

Got a small light bar for the front. I'll be building the bumper soon so didn't want to get a larger one without knowing if it will fit.
Cold Ice and Snow today.
Zim

 

[Greeneggssam]

Bought some exterior double stick tape, cleaned the glass and tacked the "shark fin" back in place on the LR3

 

[GrumpyRam]

Busy Saturday for the Ram. Replaced rear3/4 spacers to 11/2. Leveled her out nicely.


finished the remote mounting of my GMRS radio.

finally mounted the 4 low engage switch.

plasti-dipped the last of the chrome emblems.


and to finish the day, mounted my OB emblems.

 

[K12]

Finally put the solar panels on the topper to charge the Goal Zero.

 

[dp454so]

Really tired after this exhausting install of my front facing cam. Two zip ties and three sips of coffee and done. LOL. Works okay but the APP needs help.
Zim
View attachment 223707

Lol. There is nothing wrong with being efficient ;) Good work!

What kind of camera / app / system are you running?

 

[JacksonRL]

Installed a gang switch in the “control room” of my trailer. I had little toggle switches inside the fridge door but decided it’d be better to have them in the compartment with the goal zero.

I also installed a hitch camera into the open receiver spot on the RIG’d Mega swing.

 

[SJ.Overland]

UACs were swapped yesterday as well as I added in sliding sway bar links. Juts to give a bit more flex when the pins are pulled. A compromise to pulling the swaybar fully out.

 

[Christophwest1978]

Installed new radio and shifter knobs, much better than the ugly silver. Also added some yeti decals.

 

[roots66]

Replaced the old hitch with the new dual hitch/receiver and tested the cargo basket and new bike carrier.

 

[North American Sojourner]

Lol. There is nothing wrong with being efficient ;) Good work!

What kind of camera / app / system are you running?

Niloghap hd waterproof reverse camera and I got mine off ebay. I lost the directions that has the link to the app but I found one that works. They are really all the same.
Zim

 

[North American Sojourner]

Changed directions a bit and made a panel for the junk. I'm not sure I'll stay with this but it works. More lights and the winch on the way so I'll need some distribution help.
Zim

 

[SJ.Overland]

Changed directions a bit and made a panel for the junk. I'm not sure I'll stay with this but it works. More lights and the winch on the way so I'll need some distribution help.
Zim
View attachment 224439

Looks good enough to me Zim. Good work.

 

[JacksonRL]

Putting this basket back on and this doesn’t look correct at all. But this is the way it was installed I’m sure. Can anyone verify and correct me if I’m wrong?

 

[roots66]

Replaced the old seat back backpack with this seat back gun rack & molle panel. All the CERT stuff fits in the included pack and the first aid kit is in the compartment below it. And, there's still room for a trauma kit. Only issue is the straps aren't made for seats with integrated headrests, so I'll have to work on that....later.

 

[dp454so]

Replaced the old seat back backpack with this seat back gun rack & molle panel. All the CERT stuff fits in the included pack and the first aid kit is in the compartment below it. And, there's still room for a trauma kit. Only issue is the straps aren't made for seats with integrated headrests, so I'll have to work on that....later.

View attachment 224521View attachment 224522

Good work. Curious what gun you’ll run in that rack. I’ve snagged the gray man tactical panels but haven’t had the need to strap and AR to it yet.

 

[JacksonRL]

Mounting a trickle charge 10w solar panel to a tv swing mount. Had a spare tv swing mount and thought it’d be great to use for this 10w solar panel. The solar panel is from an old gate operator. Customer wanted a new panel so I got to keep the old. Going to mount this on the trailer.

 

[roots66]

Good work. Curious what gun you’ll run in that rack. I’ve snagged the gray man tactical panels but haven’t had the need to strap and AR to it yet.

99% of the time, it will be this Savage Axis 6.5 Creedmore

 

[JacksonRL]

Got the solar “tv” swivel mounted. And I installed a bolt lock to keep my fridge from sliding up against the door (broke the hinges once already). I was previously using a ratchet strap and it was very aggravating. This is much cleaner and smoother operating.