Pathfinder III
Today was a productive day. I installed a mountain off road transmission oil pan skid plate and transfer case skid plate on my 21 JLU Rubicon.
What Did You Do With Your Rig Today?
- Thread starter iamout
- Start date
Pioneer II
- 8,178
- First Name
- DALE
- Last Name
- FOLLETTE
- Member #
-
23055
- Ham/GMRS Callsign
- KJ7JDA
- Service Branch
- US Army CWO (Ret)
Member III
I take it to work becasue I have more room to work and a forklift so i tend to overpack tools lol
Pioneer II
- 8,178
- First Name
- DALE
- Last Name
- FOLLETTE
- Member #
-
23055
- Ham/GMRS Callsign
- KJ7JDA
- Service Branch
- US Army CWO (Ret)
bitmuse
Rank III
Member III
Cleaned up my arches with a grinding wheel, scraping off the rust from when I attacked it with an angle grinder. I could've not had to do any of that had I painted it day one, but procrastination got the better of me. 
Then I taped off the edges and gave the raw, freshly ground edges a coat of rust resisting undercoat. Not the best looking, but it stops rust and that's the important part!
It feels pretty minor all in all, but there's so many small things that go into these rigs that aren't build journal worthy.
Then I taped off the edges and gave the raw, freshly ground edges a coat of rust resisting undercoat. Not the best looking, but it stops rust and that's the important part!
It feels pretty minor all in all, but there's so many small things that go into these rigs that aren't build journal worthy.
Member III
- 2,827
- First Name
- Joshua
- Last Name
- Downs
- Member #
-
20468
- Ham/GMRS Callsign
- KK6RBI / WQYH678
- Service Branch
- USMC 03-16, FIRE/EMS
Pathfinder III
Member III
Got the lift on and it definitely looks better 
I’m no suspension expert but I have a feeling they sent the wrong bump stop extension with the kit .
I’m no suspension expert but I have a feeling they sent the wrong bump stop extension with the kit .
OverLamb24
Rank V
Advocate III
Member III
Looks like it’s a common issue with the teraflex kits , they use a 2.75” extension and coupled with the metalcloak bumpstops being a inch longer it’s resting on the bump stop pad on level ground . Not a big deal just gotta pull it apart again and pull the extension out .
Trail Blazer III
- 6,000
- First Name
- Beau
- Last Name
- K12
- Member #
-
28559
- Service Branch
- Air Force
bitmuse
Rank III
Member III
I cut two holes and angle grinding them together on my fender today in an attempt to run some snorkel tubing. The cuts were great and professional looking, and I took some pics for the build log I will post eventually, but alas today was a failure.
I let myself feel rushed by the coming rain, and I didn't check my measurements. I cut the hole too high on my fender and the tubing can't fit between the fender and the body. Doh!!!
Mistakes happen, I'm feeling a little bummed, but used fenders are easy to come by and I'll hit the junkyard when I've finished moving this coming week. .. And then just do it all again with my new knowledge.
I let myself feel rushed by the coming rain, and I didn't check my measurements. I cut the hole too high on my fender and the tubing can't fit between the fender and the body. Doh!!!
Mistakes happen, I'm feeling a little bummed, but used fenders are easy to come by and I'll hit the junkyard when I've finished moving this coming week. .. And then just do it all again with my new knowledge.
Took the rig out and brought my youngest one out camping finally(just turned a year old last month). My wife got me a reservation at a state park for father's day and we celebrated a little early with the kids. Our first overnight family adventure of the year to start the summer off right. It was a blast!
Trail Blazer II
- 6,140
- First Name
- Shaun
- Last Name
- Johannes
- Member #
-
15310
- Ham/GMRS Callsign
- KE8TDZ
Finally found the little son of a gun that’s been causing all the noise in my front left wheel. It was stuck between the dust cover and the rotor.
Attachments
Dang. I have had that happen. So annoying. I feel like I am hyper aware of odd sounds and anything like that drives me nuts. Nice work getting it out.
Member III
- 2,827
- First Name
- Joshua
- Last Name
- Downs
- Member #
-
20468
- Ham/GMRS Callsign
- KK6RBI / WQYH678
- Service Branch
- USMC 03-16, FIRE/EMS
Finished up the mostly brake rebuild on the CJ7 but found out the master cylinder is shot and the calipers are jammed up, was hoping to save them but oh well. Once those items are replaced the braking system will be essentially new other than the hardlines. Got a RA order coming in to replace those items.
Member III
- 2,827
- First Name
- Joshua
- Last Name
- Downs
- Member #
-
20468
- Ham/GMRS Callsign
- KK6RBI / WQYH678
- Service Branch
- USMC 03-16, FIRE/EMS
Started replacing the valve stem seals on my Brothers CJ7 today got the driver's side done before I lost motivation and it got too hot. I'll knock out the passenger side next day off.
