Member III
What Did You Do With Your Rig Today?
- Thread starter iamout
- Start date
Ha! You must have been a couple of seconds faster pushing the purchase button. ;-)HEY! 2 numbers apart!!
Add some rock lights.
Well half of em, tonight ill install the other side
I...uhh...bought it a present.
Moab 2.0 Aluminium Bumper with black powder coating.
And rock sliders with the kick out on them.
Should be about 4 weeks or so to get them made then I get to road trip it up to Idaho Falls to pick everything up!
Moab 2.0 Aluminium Bumper with black powder coating.
And rock sliders with the kick out on them.
Should be about 4 weeks or so to get them made then I get to road trip it up to Idaho Falls to pick everything up!
Influencer I
Today I changed my fuel filter and put my skid plate back on.
Influencer III
- 5,079
- First Name
- Drew
- Last Name
- Hawley
- Member #
1537
- Ham/GMRS Callsign
- WRBZ674
- Service Branch
- USN veteran
Salt season is upon us in Pennsyltucky so it's time to go back to being a slick top. My pulley system could use a little work but it makes removal/reinstalling a lot easier.
Influencer III
- 5,079
- First Name
- Drew
- Last Name
- Hawley
- Member #
1537
- Ham/GMRS Callsign
- WRBZ674
- Service Branch
- USN veteran
Influencer II
Mounted up some 4" led lights I had laying around for camp lighting.. Now I just need to wire them..
Picked up a rim and full sized spare for the Evoque. Just barely fits where the donut goes, apart from being 100mm wider than the donut! Need to cut some styrofoam or something to fit around it where the load floor used to be.
Played Tetris for our upcoming trip to the triangle...And put off the wiring loom again <sigh>.
Officially (Pretty sure/could still buy some stuff and omit later), we are now out of room.
Officially (Pretty sure/could still buy some stuff and omit later), we are now out of room.
Went out and tested the rock lights last night.
Quadra drive still amazes me how well it works.
Influencer II
I read through your build thread and went to the website to find those same rock lights and it appears they don't sell them.. Unless I'm missing something.. I like them!!
Went out and tested the rock lights last night.
Quadra drive still amazes me how well it works.
Influencer III
- 5,079
- First Name
- Drew
- Last Name
- Hawley
- Member #
1537
- Ham/GMRS Callsign
- WRBZ674
- Service Branch
- USN veteran
I'm jealous.. There's a snow balls chance in Key West that I could ever fit my 5th wheel/tire in there. Even deflated an OE sized tire still doesn't fit so now I have a place for my tools, custom jack, recovery gear, etc.. under the floor.
These ones are off-road only.
Not the fish eye ones i was originally honna use, my buddy picked em up for me from the offroad expo in anaheim a few months back.
have you thought about building a box that you can remove so you can still access your tire?
today I made a few minor mods to my roof rack. I removed the plastic coating from the crossbars and added a set of ARB awning mounts. I had to do some drilling, but I think that the ARB mounts are sturdier than the set of FOURTECKS I originally had on their. I plan on painting the rack come spring.
Pathfinder I
Went on a little jaunt & photo shoot - bit of a rain but fun anyway!! ...Edited to put my favorite in from the day...an afternoon along Tinkham Road off of Hwy 90 east of Seattle (North Bend area).....
Last edited:
Mounted Hella dual purpose driving/fog lights. I will of course be running 12ga wiring and a 40 amp relay and will wire all 4 bulbs to run at once :-) Ran out of daylight.
I have a light bar for the upper tab mounts but it's too big. I'm thinking shovel mounts for the murderspork...
I have a light bar for the upper tab mounts but it's too big. I'm thinking shovel mounts for the murderspork...
Went out and tested the rock lights last night.
Quadra drive still amazes me how well it works.
Behind rear tire
In front of rear tire
Behind front tire
In front of front tire
