What Did You Do With Your Rig Today?

[Sparksalot]

I recently picked up a second Tahoe to use for a daily driver, so thecopcar can get a little more developed for overlanding and camping. Both are GMT900 generation, so I can do some common mods, and definitely maintenance. While both are PPV models, I’m leaning towards calling the new one thenewhoe. My wife has chosen to name it Lola.

today Lola got new front hubs and sway bar links. she was a K-9 unit so is missing part of the interior. This gives me to excuse to fully do a rear seat delete along with door panels to thecopear. That will start tomorrow.

View attachment 173143View attachment 173144View attachment 173145View attachment 173146View attachment 173147

 

[RoarinRow]

I recently picked up a second Tahoe to use for a daily driver, so thecopcar can get a little more developed for overlanding and camping. Both are GMT900 generation, so I can do some common mods, and definitely maintenance. While both are PPV models, I’m leaning towards calling the new one thenewhoe. My wife has chosen to name it Lola.

today Lola got new front hubs and sway bar links. she was a K-9 unit so is missing part of the interior. This gives me to excuse to fully do a rear seat delete along with door panels to thecopear. That will start tomorrow.

View attachment 173143View attachment 173144View attachment 173145View attachment 173146View attachment 173147

Gonna be a nice project.

 

[Retired]

Whose tie rod sleeves did you use?

I think they're by SDT. Part #TRS01. From AmazonView attachment 173152

 

[Dirty_Hands & Adventures]

Today , I started the front end and axle rebuild . Coated the front wheel wells , put the new leveling kit & bump stops in along with HD track bar bracket . Making progress !!

 

[Ubiety]

Got the fridge today and seems to be a winner. Cooled to zero in less than 30minutes.


View attachment 173116View attachment 173117View attachment 173118View attachment 173119View attachment 173120View attachment 173116View attachment 173117View attachment 173118View attachment 173119View attachment 173120

You use real lump charcoal! Congrats on the fridge!

 

[Downs]

Finished up the AMC20. That was my first gearset install. That was my last big obstacle with the frame and drivetrain going to drop the tcase and driveshafts in tomorrow then I'm down to some bodywork and paint. I can kind of see the light at the end of this tunnel.

 

[RoarinRow]

Fixed my backup camera. Wire was loose. Call me crazy, but I added a sound bar inside the camper shell. Big difference compared to my previous JBL bluetooth speaker. Then took a drive with the family to Apple Hill for lunch and some of their famous apple cider.

Picked up this new $99 Insignia sound bar for $20.

View attachment 173534

Got a little off-road lol.

View attachment 173535

 

[Sparksalot]

Fixed my backup camera. Wire was loose. Call me crazy, but I added a sound bar inside the camper shell. Big difference compared to my previous JBL bluetooth speaker. Then took a drive with the family to Apple Hill for lunch and some of their famous apple cider.

Picked up this new $99 Insignia sound bar for $20.

View attachment 173534

Got a little off-road lol.

View attachment 173535

I haven’t been to Apple Hill since the 70s. I do remember the cider.

 

[RoarinRow]

I haven’t been to Apple Hill since the 70s. I do remember the cider.

It's probably more crowded than when you went. I was little annoyed to be honest. So many people not wearing masks. Oh well. So long as the kids enjoyed the excursion and I got to take the rig out.

 

[Wildmanreed]

Emailed a company to find out if they have any bed racks that are designed to work with their tonneau cover. The tonneau cover in question is the Stowe 2 in 1 tool box tonneau cover. Let’s hope they respond.

 

[afootorafloatLJ]

Explored the historic mining town of Silver City Idaho today. Checked out forest/BLM road F483. 4x4 worthy but not technical. Very pretty overcast day. Idaho City is pretty much closed down until next spring summer. Here are a few photos and I try and post a route map for others. Transmission shift cable popped off on the way down and I was stuck in first gear until I zip tied the cable to the tranny shift arm

 

[RoarinRow]

Added a rodent deterrent contraption under my hood. Not so much for mice, but cats. They love hiding under my truck. With cooler weather ahead (some day), I didn't want any of those guys seeking shelter in my engine bay. 5 min install lol.


Feels well made for the price.

View attachment 173670

 

[Sparksalot]

Finished up the weapon locker swap with mounting the radio main unit on the cargo barrier, near the alien.

View attachment 173672

 

[systemdelete]

Pulled down the rear wheel hubs for cleaning/inspection/re-grease of the bearings. Looking great, new bearings have settled in nicely. One more thing ready for winter.

 

[Lanlubber In Remembrance]

Pulled down the rear wheel hubs for cleaning/inspection/re-grease of the bearings. Looking great, new bearings have settled in nicely. One more thing ready for winter.

How often is it recommended. I thought the rear bearings get their lube by way of the diff carrier center section.

 

[systemdelete]

Pulled down the rear wheel hubs for cleaning/inspection/re-grease of the bearings. Looking great, new bearings have settled in nicely. One more thing ready for winter.

How often is it recommended. I thought the rear bearings get their lube by way of the diff carrier center section.

Wheel hubs on a D1/Defender(original) are outboard of the axle’s differential lubrication. If the outer axle seal in the tube which rides on the axle shaft fails the outer wheel bearing grease can be contaminated by it though more commonly it’s contaminated by submerging the axle in water.

I believe the factory D1 schedule advises wheel hub bearings should be repacked at the time of brake service or 30k whichever occurs first. I have it on my annual maintenance/inspection checklist. I installed these last October before I went up to Ontario for thanksgiving, so per my schedule it was time. ;)

 

[JAM Land]

Installed Icon 2.5" coilovers and Icon 2.0" inch rear shocks on my 2019 RAM Classic today.

 

[Lanlubber In Remembrance]

Wheel hubs on a D1/Defender(original) are outboard of the axle’s differential lubrication. If the outer axle seal in the tube which rides on the axle shaft fails the outer wheel bearing grease can be contaminated by it though more commonly it’s contaminated by submerging the axle in water.

I believe the factory D1 schedule advises wheel hub bearings should be repacked at the time of brake service or 30k whichever occurs first. I have it on my annual maintenance/inspection checklist. I installed these last October before I went up to Ontario for thanksgiving, so per my schedule it was time. ;)

20-30 k miles sounds like what I had to repack bearing on my older vehicles before everyone went to pre-lubed wheel bearings. 30k miles would be 5 years of driving for me. Yearly sounds good to me if I ever get to drive mine. I've owned it for 1 3/4 years now and only put 1000 miles on it. Disgusting isn't it !

 

[Ubiety]

M.O.R.E. dead pedal installed! What a pain that was :) The JL version works just fine in a JT. Followed other's advice and wedged some foam behind the "bracket with welded bolts" to keep it in place while fitting the rest of the pedal. I'm sure I'll pull it apart and adjust but can already tell that I like it (in the garage); seems like it will reduce ankle strain. Will get to test it out tomorrow on the Sugarloaf day trip!

Probably will install the hide-a-step bases (front driver/pax) later in the day. My wife should barely notice the impending lift and 35s :)

Cleaned garage and shop last weekend - it is a totally amazing experience to be able to get at your tools!

View attachment 173892

 

[Lanlubber In Remembrance]

M.O.R.E. dead pedal installed! What a pain that was :) The JL version works just fine in a JT. Followed other's advice and wedged some foam behind the "bracket with welded bolts" to keep it in place while fitting the rest of the pedal. I'm sure I'll pull it apart and adjust but can already tell that I like it (in the garage); seems like it will reduce ankle strain. Will get to test it out tomorrow on the Sugarloaf day trip!

Probably will install the hide-a-step bases (front driver/pax) later in the day. My wife should barely notice the impending lift and 35s :)

Cleaned garage and shop last weekend - it is a totally amazing experience to be able to get at your tools!

View attachment 173892

Duaaa, Greg, what is a dead pedal ?