
Member III
Really nice wheel/tire combo!Well i didn't do it, more like I paid for it to be done. Got new wheels put on today. I think they look great!
Before
View attachment 168490
After
View attachment 168491
Member III
Really nice wheel/tire combo!Well i didn't do it, more like I paid for it to be done. Got new wheels put on today. I think they look great!
Before
View attachment 168490
After
View attachment 168491
Member III
Yup, been doing the same to my home. Replaced all WiFi and network equipment in my home to support distance learning and working from home. Just finished last night and getting to a stage where I'm happy with the setup. Hmmm, now to do the same thing in my rig lol.loaded up a bunch of ethernet cable, few tools, my laptop and headed to my brother's house a few miles away to fix his home WI-FI. Seems that wi-fi and internet connections are a thing these days, with all the remote learning and working going on from home base.
Enthusiast III
Not sure if you are kidding but- Rig wi-fi, hmmmm. hot spot enabled cell phone, or verizon mi-fi device for areas within cell range. Satelite options are $$$$$ with restrictions as one can imagine.Yup, been doing the same to my home. Replaced all WiFi and network equipment in my home to support distance learning and working from home. Just finished last night and getting to a stage where I'm happy with the setup. Hmmm, now to do the same thing in my rig lol.
Enthusiast III
very nice!Built a roof rack for my T4R this weekend!
Super excited to have it ready for some trips planned to happen in the next month.
View attachment 168387
Enthusiast III
|
Item(s) Subtotal: 28.91$ |
Shipping & Handling: 13.21$ |
Total for This Shipment: 42.12$ |
Member III
Well, I certainly have most all the bits and pieces, just haven't tied everything together. I've got a good stand alone hotspot device, I have a wifi repeater/extender, I have a portable firewall device, I have Inreach Sat, I have Weboot Reach / cell phone repeater, just haven't sat down to see how I could put it all together. I have the space and power requirements for sure lol. Skills, not so much.Not sure if you are kidding but- Rig wi-fi, hmmmm. hot spot enabled cell phone, or verizon mi-fi device for areas within cell range. Satelite options are $$$$$ with restrictions as one can imagine.
But if one really, really needs it when off the grid, it's available.
Wondering how effective those add-on auto cell booster 'antenas' work to extend cell signal range.
Enthusiast III
UGH, carbs!!!Tore the CJ carb down this morning. Cleaned up the main body and have the rest of the parts standing by for carb dip when i get home today. Goal this evening is to have that put back together and get started on the transmission.
![]()
7/8” stainless keystock and 2” 3/16 angle iron bolted to the factory bolt holesvery nice!
How did you attach it to the roof rails?
Enthusiast III
must be so great to be able to weld!
Contributor III
Enthusiast III
you made a roof rack, and it looks good so ya can't that bad at it.Well, I'm rather poor at it but hey, practice makes progress!
Member III
Now you just need to load her up with gear and gas!Drove 10 hours today to pick up my bed cage and get my sliders welded on she is now complete for at least a week ;)
Contributor III
First thing I did after getting homeNow you just need to load her up with gear and gas!Drove 10 hours today to pick up my bed cage and get my sliders welded on she is now complete for at least a week ;)
Advocate III
Member III
Member III
Why did your intake manifold need machining. Was it warped ?I dropped of my intake manifold to the Machine shop, picked up my head gasket set while I was there. Also ordered a distributor drive gear, ignition control module, and a few other parts... all should be here within the week.
I also replaced a burnt out turn signal bulb in my wife’s 4Runner, and need to get its oil changed SOON.
then after that I painted some stuff black, and prepped a few more parts for paint. Tomorrow I’ll post it all up in my build thread.
Contributor III
Advocate III
It’s not getting machined... just hot tanked and runners polished... I might get it ported as well... but I think that will be early next year when I rebuild my existing motor... it’s going to be a simple build: balanced, blue printed, simple valve job, port matched intake, mild roller cam, and a few other things... still going over options, talking to my builder, and waiting until I get the 89 engine pulled an inspected before I wrap my head around the whole build.Why did your intake manifold need machining. Was it warped ?