What Did You Do With Your Rig Today?

Boort said:
@True North


Difference was likely shipping weight. I got a quote from them before I built mine and IIRC they quoted shipping weight rather than installed weight. Was that 97lbs per drawer or for the full system, with flaps etc...?

Boort
Click to expand...

Ah, that could make sense. It was 97lbs for the full system, but not including the optional drawer dividers (maybe 1-2lbs at most depending on personal configuration). I also did not include the weight on the tie down straps or the metal tie down rods which could be another 2lbs?
 
  • Like
Reactions: Boort
Bought a couple of things needed to make my Overland trips better. Spring Eye Bolts for the frame end of the control arms on my 95’ Jeep XJ. 9/16” x 4.5” Grade 8 with locking nut. J.T. Brooks, automatic Tire Deflators. Then on order, JK, ARB Compressor Under Seat Mounting Kit. Benz.
40EF6FEF-DF73-4954-92D9-E455C3BF2A90.jpeg
 
  • Like
Reactions: HappyOurOverlanding
vegasjeepguy said:
Hooked up my trailer to my new rig.
Click to expand...

You edited it but when i first saw your message you had a message about a converter, just wanted to give you a heads up that if your trailer has brakes they won't work in case you didn't already know that (i assume you do, but for safety i'm calling it out just in case)

That truck is slick looking, and so is your trailer! Time for a new screen name? vegas4runnerguy? vegasjeepand4runnerguy?
 
  • Like
Reactions: MazeVX
brien said:
You edited it but when i first saw your message you had a message about a converter, just wanted to give you a heads up that if your trailer has brakes they won't work in case you didn't already know that (i assume you do, but for safety i'm calling it out just in case)

That truck is slick looking, and so is your trailer! Time for a new screen name? vegas4runnerguy? vegasjeepand4runnerguy?
Click to expand...

No brakes...no worries. And I’ve been vegasjeepguy since /000 so I don’t see that changing. I’ll let my wife think the 4Runner is hers.
 
  • Like
Reactions: HappyOurOverlanding, brien and MazeVX
KD7WCD said:
How much modifications did you need to do?
Click to expand...

I had to trim the upper lip to the shape of my bed/camper, get new plywood to extend the middle platform and because the Tacoma bed is shorter I still have to make covers to plug up holes in the front of the bed. It’s all very minor. For $100 plus $30 for a new sheet of 1/2 inch plywood, I think I made out pretty good. IMG_8301.JPG
 
  • Like
Reactions: KD7WCD and HappyOurOverlanding
You must log in or register to reply here.
Top Bottom