Member III
-
Guest, UPDATE We went through the site migration runbook and completed all steps. We will need to complete the migration next week, but will leave the forums up for the weekend. A few days after maintenance, a major upgrade revision to the forum site will occur.
-
What Did You Do With Your Rig Today?
- Thread starter iamout
- Start date
Member III
Hmmmmmm! Very interesting. I think I like it. [emoji41]
Sent from my SM-G920V using OB Talk mobile app
Member III
Member III
Nicely done. I'll have to check this out for mine. I keep looking at the grab and go ones.I finished up the compressor mount and completed the installation in our 4Runner
Sent from my SM-G920V using OB Talk mobile app
Member I
Very nice and well done!I finished up the compressor mount and completed the installation in our 4Runner
TrippinStfflr
Rank IV
Enthusiast III
Added two 6v interstate batteries to my tailer. Went from 80Ahr to 225Ahr. Tested it out last night in Quartzsite. Lasted from 5pm to 9am and still got plenty of power left. Very pleased!!!
Enthusiast III
What is the switch on the far left?I finished up the compressor mount and completed the installation in our 4Runner
Enthusiast III
That switch is for the heated wipers.
Traveler III
tsteb112
Rank IV
Pathfinder I
Nice work. That’s pretty cool. Looking into this for my tire carrier. Did you use a piano hinge as a pivot point for the table or something else
Sent from my iPhone using Tapatalk
Enthusiast III
Deck installed in the rear cargo area of the FJ and installed both the fridge slide and fridge today!!! Next up..... the drawers!!
Sent from my SAMSUNG-SM-G935A using OB Talk mobile app
Sent from my SAMSUNG-SM-G935A using OB Talk mobile app
Traveler III
Like Mike Wesner a few posts back, I installed my hot water system in my trailer. I have a propane tank and water system already installed inside the trailer. This thing works surprisingly well. It was on amazon for $129 and is the Camplux 6l model. I also (finally) installed new 6 lug hubs courtesy of etrailer and painted some old tacoma wheels to go on it instead of the little trailer wheels I was running. The tires are old ones and I'll be replacing them this week. I also ran cables to the back of my Tacoma from the battery isolater to the back so I can charge the trailer battery while driving. It was a busy weekend but I'm getting ready for a two week trip to Colorado, New Mexico, and Big Bend beginning March 15th.
Last edited:
Enthusiast III
Oh yeah, and I did this........
While drilling new clean threads for the cargo deck mount, the drill bit snapped (more like exploded) while drilling my third hole, sending a sharp piece of the bit, right into the rear corner glass!!! $600 replacement by Safelite!!! Found the glass on Amazon and EBay haven't the slightest idea of how to install it. Any ideas to save me some cash?
Sent from my SAMSUNG-SM-G935A using OB Talk mobile app
While drilling new clean threads for the cargo deck mount, the drill bit snapped (more like exploded) while drilling my third hole, sending a sharp piece of the bit, right into the rear corner glass!!! $600 replacement by Safelite!!! Found the glass on Amazon and EBay haven't the slightest idea of how to install it. Any ideas to save me some cash?
Sent from my SAMSUNG-SM-G935A using OB Talk mobile app
Off-Road Ranger I
No good. You'll need a wire saw to cut through all the glue. Looks like a piece of wire with handles on it. If you go to a local windshield place they can give you some tips on how to cut it out.
OB# 3805
Enthusiast III
Thanks for the heads up. Unfortunately, our first trip out with the FJ and the new trailer build, is this Friday.....I don't think I'll have time.... and I'm too chicken to try it on my own. Safelite is scheduled to do it on Thursday as of right now. Just wish i could save a little cash, but don't want to mess it up, especially in a time crunch.
Sent from my SAMSUNG-SM-G935A using OB Talk mobile app
Member III
Nicely done. It's interesting to see who puts the fridge on the right or the left side.
