It needs some work still but stripped off the body molding before I weld up the holes and apply bed liner to the lower portion of the doors.
What Did You Do With Your Rig Today?
- Thread starter iamout
- Start date
It needs some work still but stripped off the body molding before I weld up the holes and apply bed liner to the lower portion of the doors.
Added a critical Jeep upgrade... Yeti bottle opener.
Take a look at Move Bumpers! That's what I've decided to go with!
Sent from my P00I using OB Talk mobile app
Not today - did it back during the week before Christmas as we wanted to try it out during our family camping for the week at Alabama Hills.
Built a DIY Solar Shower for the roof rack out of 4" black ABS drain pipe. Have a 73" piece going into a 90 with a 42" or so piece going across the back. Pretty much made it the standard way except I did not put a tire fill valve on it. I ran a 1/8" hard plastic line through the top of the shell and down to a pressure regulator mounted in the bed. It is connected using push in STC fittings so I con connect to the on board air system and have consent air for the full load of water.
Water follow worked great but it was cloudy the whole time we were out so not much warm water came out of it! LOL
Thought I had taken pictures but can not find them - get some tomorrow.
Built a DIY Solar Shower for the roof rack out of 4" black ABS drain pipe. Have a 73" piece going into a 90 with a 42" or so piece going across the back. Pretty much made it the standard way except I did not put a tire fill valve on it. I ran a 1/8" hard plastic line through the top of the shell and down to a pressure regulator mounted in the bed. It is connected using push in STC fittings so I con connect to the on board air system and have consent air for the full load of water.
Water follow worked great but it was cloudy the whole time we were out so not much warm water came out of it! LOL
Thought I had taken pictures but can not find them - get some tomorrow.
Influencer II
After having it for months I finally got around to badging my truck.
B_the_GXdude
Rank VI
Influencer II
B_the_GXdude
Rank VI
Influencer II
Built in my garage door opener. Mounted it to the A pillar of my jeep jk. So I don't have to worry about it getting stolen when I have the top off.
Sent from my SM-G955U using OB Talk mobile app
Sent from my SM-G955U using OB Talk mobile app
Enthusiast III
Today in North Florida weather was clear and sunny and conditions were cooperative so I was finally able to put my emblem on my Frontier, over the past two weeks I have been rehabbing my pioneer tools and modifying my basket to accommodate my tools. Over the next six months I will be upgrading the suspension with a lift kit and adding front and rear off-road bumpers a winch extra lights and additional basket over the cab.Attachments
Member III
I swapped in some black bezel headlights from the later Xterras into my 07. I think they look really good on the darker colors.
It needs a bath, I might go rinse it off the evening.
It needs a bath, I might go rinse it off the evening.
A neighbor of a friend cut down a few trees so I asked if I could take some of the wood for firewood. Ocassionaly I use my trailer as a utility trailer.
Enthusiast III
Moved the cb radio and waxed the hood and hatch that were looking pretty rough. I also changed the oil this morning.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
https://fenderbraces.com/t/toyota-tacomahere you go! I really like them!
Sent from my iPhone using OB Talk
Installed a 2” TF lift in my JKU. Looks much better with the lift and Rubi Recon wheels/tires.