Klinton Kehoe
Rank VII
Expedition Master II
Sliderssss!!!!!! Thanks to Tyrant fab in Auburn for helping me build them.
OB# 3753
OB# 3753
What Did You Do With Your Rig Today?
- Thread starter iamout
- Start date
Member II
Decided to take advantage of all the roof rack space. Added a Pelican case, and moved the traction devices over. WKs don't have a ton of interior space to work with. The case will be for waterproof storage of temporary equipment and camping gear.
Setup the GoalZero Yeti 400 to charge from the Jeep's built-in inverter while traveling.
Setup the GoalZero Yeti 400 to charge from the Jeep's built-in inverter while traveling.
Member III
That's cool! 2x3? I replaced my rusted out rockers with some 2x3 120 wall.Sliderssss!!!!!! Thanks to Tyrant fab in Auburn for helping me build them.
OB# 3753
Jonah "Rustyburbin" #4084.
5 kids, a wife, dog and a
1970 K20 Suburban
Advocate III
Awesome - a perfect solution for dry weather camping!
Might want to work on orientation of the various pieces, though ;)
Can't wait to see your solution for a camp shower. . .
Might want to work on orientation of the various pieces, though ;)
Can't wait to see your solution for a camp shower. . .
Installed a new roof top bed...[emoji44]
Klinton Kehoe
Rank VII
Expedition Master II
Rusty they are 2x4 and 3/8th wallThat's cool! 2x3? I replaced my rusted out rockers with some 2x3 120 wall.
Jonah "Rustyburbin" #4084.
5 kids, a wife, dog and a
1970 K20 Suburban
OB# 3753
Creator III
Yesterday installed new rear Calipers, Rotors, and pads
Getting front Hellwig sway bar and Bilstein steering Damper in today
Sent from my iPhone using OB Talk
Getting front Hellwig sway bar and Bilstein steering Damper in today
Sent from my iPhone using OB Talk
Creator III
Yesterday installed new rear Calipers, Rotors, and pads
Getting front Hellwig sway bar and Bilstein steering Damper in today
Overland Bound Member #6080
Follow us on Facebook, and Instagram
Getting front Hellwig sway bar and Bilstein steering Damper in today
Overland Bound Member #6080
Follow us on Facebook, and Instagram
Traveler III
Enthusiast III
Highly recommend going with the Blue Sea 7622 ML-ACR instead, and rigging up your own cables.
Member III
That's nuts! ... Glad you passed.
Jonah "Rustyburbin" #4084.
5 kids, a wife, dog and a
1970 K20 Suburban
Off-Road Ranger I
Nice Tahoe. What are specs on your rig?Checked out Surprise Lake near Carbonado, WA this weekend.
OB# 3805
Traveler III
It's not so much the cables as it is the cradle for the second battery. There aren't a lot of options out there for the Lexus GX when it comes to that. I can buy the cradle from him separately though.
Enthusiast III
Member III
Not to my rig directly, but my deflator wouldn't work on the trail ride last weekend. It wouldn't seat properly on the valve stem because I have the TPMS stems rather than the standard type. I popped the snap ring off and chucked it up in my little lathe and turned the section off the end that didn't have any threads in it. This allowed it to go down far enough on the valve stem to seal pretty good and it will now hold well enough that I can set a pressure rather than hoping I got it right as it leaked down around the threads.
I wish I could get a seal of some sort up inside of the threaded part of it so it would seal off better, but it is what it is I guess. At least I can use it now.
I wish I could get a seal of some sort up inside of the threaded part of it so it would seal off better, but it is what it is I guess. At least I can use it now.
