Now get a swingout to show it off and hold other things, like fuel/ water, a jack/ shovel/ axe, etc.
What Did You Do With Your Rig Today?
- Thread starter iamout
- Start date
-
Guest, UPDATE We went through the site migration runbook and completed all steps. We will need to complete the migration next week, but will leave the forums up for the weekend. A few days after maintenance, a major upgrade revision to the forum site will occur.
Pathfinder I
Drained the auto box on my disco td5 removed the sump and replaced the automatic filter, refitted and replenished with ATF. Removed the cat down pipe ready to replace it tomorrow with a de-cat downpipe.
Member III
It's on the long list of things I want! Right now sliders and better skids are more important though. Hoping to get the sliders this summer, skids this winter and a rear bumper next summer. Being on a budget makes things go so slow...
Traveler III
- 4,002
- First Name
- Kelly
- Last Name
- Herrin
- Member #
-
2032
- Ham/GMRS Callsign
- KFØDEX
Traveler III
I don't see the Yeti 1400 on Costco's web site. Do they have a local special going on? Online shows the 1000 Lithium for $1000, which isn't even shown on the Goal Zero web site.
Last edited:
Member II
Pre-season preventative maintenance, and high output alternator install in the F450 this morning.
Traveler III
- 4,002
- First Name
- Kelly
- Last Name
- Herrin
- Member #
-
2032
- Ham/GMRS Callsign
- KFØDEX
I was at the Costco in Sandy Utah. Goal Zero had a rep there, with a kiosk. I paid $500 under retail, with the Costco return policy. The guy at the Goal Zero booth at Overland Expo was the one that tipped me off about Costco.
Traveler III
I'll have to take a look at our local Costco! I modified my previous post. All Costco shows on their web site is a Yeti 1000, which isn't even listed on the Goal Zero site. That's a lot of buying power!
Thanks for the heads up!
Thanks for the heads up!
It was actually last week but I removed the android radio from a few posts above and put the stock HU back in. It worked great just didn't look right to me.
Put new pads on the front.
Put new pads on the front.
Picked up a Yeti Rambler in OD at the Sportsman's Warehouse that just opened down the road from us. Promptly affixed the Yeti sticker to th tongue box on my trailer.
Off-Road Ranger I
- 1,011
- First Name
- SCOTT
- Last Name
- KEILMAN
- Member #
-
0110
- Ham/GMRS Callsign
- K1BOP
Member III
Traveler III
Enthusiast III
Set up my new Gator Hoist from Costco and raised the hard top off the JKU! Then installed my new TrekTop NX soft top that I bought in February. And it's finally going to be sunny here this long weekend!
Sent from my iPad using OB Talk
Sent from my iPad using OB Talk
Traveler III
Worked on cleaning and painting an old Hi Lift jack I picked up for CHEAP.
I will start painting sometime this weekend and hopefully all will be good for another decade or so. I'm in it for about $30 so far.
"He who has a why to live can bear almost any how."
-Nietzsche
I will start painting sometime this weekend and hopefully all will be good for another decade or so. I'm in it for about $30 so far.
"He who has a why to live can bear almost any how."
-Nietzsche
Member III
I rigged up my CB for the meet-up this weekend. I had hoped to get my dual band properly installed and remoted but I haven't had a chance yet.
Loaded up the trailer with a bunch of "gun stuff" to go out with a buddy and his 19 year old daughter and teach her to shoot.
As I said above, I loaded up the trailer with gun stuff to take a buddy and his daughter out shooting for her first time. I always enjoy taking someone out for the first time as it is a privilege and a responsibility. I also enjoyed seeing someone feeling nervous at the beginning and leaving much more relaxed and having enjoyed themselves with the desire to do it again.
(Pay no attention to the position of the shooting hand as this is was the very beginning when she was working on her sight picture with the iron sights)
(Pay no attention to the position of the shooting hand as this is was the very beginning when she was working on her sight picture with the iron sights)
Last edited:
