Rig Photos

Been doing a lot of work on the JKU this past month. Not much snow here in colorado but it does make for some great weekends to work on the rig!

Put on the Auxbeam lights and finally got my leveling kit put on to make up for the ungodly amount of gear I carry. She was really starting to sag in the back but back to normal now! I ended up getting 1.75" in the rear and 1.25" in the front which makes for almost a perfect stance when loaded down.

Next week should have the Fox Performance 2.0 resevoir shocks installed and ready for spring trail rides!
 

Attachments

  • 84266a1c-2d75-4d77-998c-52869416a2e0.jpg
    84266a1c-2d75-4d77-998c-52869416a2e0.jpg
    416 KB · Views: 50
  • fd6a79e0-e952-43a9-83e3-e119ff6fc2cd.jpg
    fd6a79e0-e952-43a9-83e3-e119ff6fc2cd.jpg
    867.1 KB · Views: 50
  • Like
Reactions: Corrie, grubworm, Kent R and 4 others
JungleSkunk said:
Been doing a lot of work on the JKU this past month. Not much snow here in colorado but it does make for some great weekends to work on the rig!

Put on the Auxbeam lights and finally got my leveling kit put on to make up for the ungodly amount of gear I carry. She was really starting to sag in the back but back to normal now! I ended up getting 1.75" in the rear and 1.25" in the front which makes for almost a perfect stance when loaded down.

Next week should have the Fox Performance 2.0 resevoir shocks installed and ready for spring trail rides!
Click to expand...

Awesome rig
 
  • Like
Reactions: JungleSkunk and El-Dracho
JungleSkunk said:
Been doing a lot of work on the JKU this past month. Not much snow here in colorado but it does make for some great weekends to work on the rig!

Put on the Auxbeam lights and finally got my leveling kit put on to make up for the ungodly amount of gear I carry. She was really starting to sag in the back but back to normal now! I ended up getting 1.75" in the rear and 1.25" in the front which makes for almost a perfect stance when loaded down.

Next week should have the Fox Performance 2.0 resevoir shocks installed and ready for spring trail rides!
Click to expand...
Good looking build. When we had our JKU we had the same sag, ended up using ARB/Old Man Emu heavy duty springs in the back.
 
  • Like
Reactions: JungleSkunk
On my third set of springs and now got that sag again. Just found out that Air Lift now makes a air spring that mounts where the bump stop is, it will get me back level once again.


7D9B94F5-8EC6-4F7E-A40C-CD70A024C181.jpeg
 
  • Like
Reactions: roots66, JungleSkunk, grubworm and 2 others
Kent R said:
Good looking build. When we had our JKU we had the same sag, ended up using ARB/Old Man Emu heavy duty springs in the back.
Click to expand...
THANKS!

The Leveling kit fixed it for now. I would like to upgrade to Teraflex outback triple rate coil springs in the future and get rid of the spacers.
 
New to me vehicle I got earlier this month, and had to send it back to the dealer to get a Cyl 4 Injector issue dealt with (glad it has a warranty) - I still have my '02 4Runner as well but I am prepping it to sell eventually, and upgraded the wife's '01 WJ Limited to a '16 WK2 Overland.
(I lost access to my original email as the host service shutdown - been a member here since '17)

PXL_20260506_215324167.PORTRAIT~2.jpg

View attachment PXL_20260508_193505499.PORTRAIT.jpg​
 
  • Like
Reactions: Bengt N, fly boy, KS_Explorer and 1 other person
xDarthBagginsx said:
New to me vehicle I got earlier this month, and had to send it back to the dealer to get a Cyl 4 Injector issue dealt with (glad it has a warranty) - I still have my '02 4Runner as well but I am prepping it to sell eventually, and upgraded the wife's '01 WJ Limited to a '16 WK2 Overland.
(I lost access to my original email as the host service shutdown - been a member here since '17)

View attachment 299763

View attachment 299766​
Click to expand...
How do you keep your fenders looking so new?
 
You must log in or register to reply here.
Top Bottom