Camp Photos!

  • HTML tutorial

gritt

Rank I

Enthusiast I

231
Buford, GA
First Name
Brian
Last Name
R
I would love some info on how you created those side covers for your bed cap. I run a cap on my truck and haven't come up with quite as efficient solution as what you have there.
 

SugarFreeShooter

Rank IV
Launch Member

Enthusiast II

1,009
Powell, OH, USA
First Name
Sam
Last Name
Post
Member #

21788

Ham/GMRS Callsign
KE8PRJ
I would love some info on how you created those side covers for your bed cap. I run a cap on my truck and haven't come up with quite as efficient solution as what you have there.
I cut the shapes out of a canvas tarp from Harbor Freight, and sewed velcro strips along the top. Matching velcro is glued to the inside of my tonneau cover. The flaps are cut to droop partway down the fender, and can be hooked to the fender with bungies tied into the grommets. i still need to design proper back flap to keep wind and rain out though. I have something made from the leftover tarp, but it's not ideal.PSX_20220120_170804.jpg
 

Desert Runner

Rank VII
Launch Member

Expedition Master III

8,507
Southern Nevada
First Name
Jerold
Last Name
F.
Member #

14991

Ham/GMRS Callsign
/GMRS=WREA307
I cut the shapes out of a canvas tarp from Harbor Freight, and sewed velcro strips along the top. Matching velcro is glued to the inside of my tonneau cover. The flaps are cut to droop partway down the fender, and can be hooked to the fender with bungies tied into the grommets. i still need to design proper back flap to keep wind and rain out though. I have something made from the leftover tarp, but it's not ideal.View attachment 221533
I dig the oversize OB rear window sticker in the back pickup's window. On another note, just the right amount of snow,........enough to appreciate it, but not enough to get stuck in it .:blush:
 
D

Deleted member 14476

Guest
Spent four days out at Parker with the Maverick shooting for our race team at the Parker 425.

Wasn’t bad at all living out of it with my girlfriend, little crammed but now considering buying a RTT I can interchange between this truck and the Silverado to help create a little more room.

I also included my personal favorite picture that I got from the race.
 

Attachments

Nomad164

Rank V
Launch Member

Member III

1,550
Rockingham, Western Australia, Australia
First Name
Karl
Last Name
Fehlauer
Member #

19548

What's with all the hoods being open? :dizzy:
The day had been hot - 40 degrees Celsius (104 Fahrenheit) and we had been working the motors hard due to the conditions, so we always raise our bonnets to allow for the engines to cool down.

Plus it gives us a chance to inspect them for oil leaks etc.

Karl
 

TCBTacoma

Rank III
Member

Enthusiast III

646
Colorado
First Name
Tom
Last Name
Butt
Member #

30761

There's been an evolution to the camp setup, and this was mostly for learning what I wanted to build out. The ML350 is not a great vehicle to take places that require much more than a *bumpy* road, but it was a start for what I wanted to learn before investing in a proper build (and given the Tacoma in my username, you can guess what I'm building out).
Start:
1FE9AC1E-5BCA-4F41-926B-0C9C7F5427A7_1_105_c.jpeg
Latest (yea, decided the SUV tent wasn't the best idea in the end):
24F702A9-8D23-402F-BFDC-21BEA792556B_1_105_c.jpeg
I like to get to camp before the weekend rush, so have a *work from camp* setup:
1E85C13B-D88D-4D21-B9DB-FC132F0553B8_1_105_c.jpeg
 

SS308

Rank V
Member

Advocate I

1,864
Cheyenne, WY, USA
First Name
Randy
Last Name
Miller
Member #

29772

Ham/GMRS Callsign
KF7QFH
Service Branch
USMC
The day had been hot - 40 degrees Celsius (104 Fahrenheit) and we had been working the motors hard due to the conditions, so we always raise our bonnets to allow for the engines to cool down.

Plus it gives us a chance to inspect them for oil leaks etc.

Karl
That's a good idea, thanks for the response.
 

Hammer Time

Rank IV
Member

Enthusiast III

1,116
Los Angeles
First Name
H
Last Name
T
Member #

28384

The day had been hot - 40 degrees Celsius (104 Fahrenheit) and we had been working the motors hard due to the conditions, so we always raise our bonnets to allow for the engines to cool down.

Plus it gives us a chance to inspect them for oil leaks etc.

Karl

I have been told by people who should know (mechanics, builders, etc.) that with modern vehicles, they'll cool down faster if the hood is left closed and the engine allowed to idle with the heater (not the AC used as a heat pump) turned on high. Have I been misinformed?
 
  • Like
Reactions: Sonarman

Nomad164

Rank V
Launch Member

Member III

1,550
Rockingham, Western Australia, Australia
First Name
Karl
Last Name
Fehlauer
Member #

19548

I have been told by people who should know (mechanics, builders, etc.) that with modern vehicles, they'll cool down faster if the hood is left closed and the engine allowed to idle with the heater (not the AC used as a heat pump) turned on high. Have I been misinformed?
I have no idea - I am not a mechanic or mechanical engineer; however, this is what I was taught to do in the Army (and three of the four vehicles were driven by ex Military), so I always do it after driving on a hot day.

Having said that though, this photo was taken at 6:00 pm that evening and it was still 37 degrees Celsius and there was absolutely no breeze and in those conditions I don't think that I would have the motor running with the heater on high and no air flow going through the radiator, seems to be a recipe for a disaster. It might work in cooler climates but in our hot and dry conditions I am not so sure and TBH, I won't be testing it out.

Karl
 
  • Like
Reactions: Christopher Hersey