4Runner Owners Registry

  • HTML tutorial

tstead60

Rank IV
Launch Member

Advocate II

989
San Diego California
Member #

5931

Does it pull hard one direction while you're driving? I had one go out on me at about 120k. Replaced it with reman callipers and the r1 concept kit, pads and rotors. Pretty nice kit for the price.
 

Ben Cleveland

Rank V
Launch Member

Advocate II

1,836
Nashville, TN, USA
First Name
Ben
Last Name
Cleveland
Member #

12148

Does it pull hard one direction while you're driving? I had one go out on me at about 120k. Replaced it with reman callipers and the r1 concept kit, pads and rotors. Pretty nice kit for the price.
Sort of? It’s developed a pull to the right that has gotten more noticeable lately. There was one day when my brakes made a grinding sound and braking vibrated the vehicle for the rest of the trip, seemed to be located passenger front. Ever since I’ve had a stronger pull to the right at highway speeds. As far as I can tell that has to be a seized or partially sticking caliper. I’ve had caliper issues before and this was pretty much what it felt like.

Going to get my alignment tuned in a month or so just to rule it out, then probably will year into the brake stuff next.
 

Ben Cleveland

Rank V
Launch Member

Advocate II

1,836
Nashville, TN, USA
First Name
Ben
Last Name
Cleveland
Member #

12148

Hey everyone name is Taylor, new to this forum! My rig is a 2006 4Runner Limited 4.0L 6CYL, currently stock but plans are to install OME lift and Falken Wildpeak AT3W 265/70/18 tires in the spring.
Welcome from another 4th gen owner! The 4th gens are becoming rarer...its great when people still show them love!
 

tmarton05

Rank III
Launch Member

Enthusiast II

509
Medford, MA
First Name
Taylor
Last Name
Marton
Member #

14836

Welcome from another 4th gen owner! The 4th gens are becoming rarer...its great when people still show them love!
Totally agree. Mine I stock now but planning on a lift and tires in the spring and can’t wait to see how she looks!
 

tmarton05

Rank III
Launch Member

Enthusiast II

509
Medford, MA
First Name
Taylor
Last Name
Marton
Member #

14836

I don't believe I ever listed in here. Purchased back in June. 2018 TRD from the dealership. Did the TRD Pro suspension with a little extra spacer up front and T13 springs in the rear. Falken Wildpeaks on Level 8 wheels.

Instagram: https://www.instagram.com/twistedjake503/









Build looks great! How are you liking the wildpeaks? Planning on getting those in the spring.
 

John Herrington

Rank II
Launch Member

Enthusiast I

Don't seem to see many 1st gens here, so here's mine.

85 4Runner. Solid axle, 22R

Fresh motor rebuild
OME lift
Fixed some rust, Raptorlined.
Have a Tepui RTT.. currently on my Jeep until I get my roof rack setup.

Too many improvements to list. Truck was a worn out shell... it's about halfway there. I hope to some day have the confidence to drive it long distances.
20180930_152529.jpeg
 

noah.wass

Rank IV
Launch Member

Enthusiast III

1,221
Vancouver, WA, USA
First Name
Noah
Last Name
Wass
Member #

15008

20170708_082213.jpg 20170813_192736.jpg IMG_20180701_075556.jpg IMG_20181102_163340.jpg Fairly new to this forum. The name is Noah and I have a 2004 SR5 T4R, V8.

I haven't done a whole lot to the rig yet. Everything is planned out; just need to get the funds, now. So far I've done the following:
  • Upgrade to Cooper Discoverer 255/70/17
  • 1" Front strut spacer (love the leveled rake look)
  • Runningboard delete
  • Installed OB Emblem
 
Last edited:

dunnymp

Rank I
Launch Member

Traveler I

233
Fresno, California
First Name
Shane
Last Name
Dunnaway
Member #

10976

Fresno Ca, 2017 TRD. My first post here aside from the new member forum quite some time ago. Only mods so far are RCI rock sliders and RCI Aluminum Skid plates. Already purchased an Icon Stage 7 that will be installed in the next few days. Anyone here in the central valley area want to go wheeling some time send me a msg. Not to good at the about me stuff lol20181102_173138.jpeg20180531_181946.jpeg20180531_182348.jpeg20170723_184017.jpeg20180108_103351.jpeg20180529_194915.jpeg