Does it pull hard one direction while you're driving? I had one go out on me at about 120k. Replaced it with reman callipers and the r1 concept kit, pads and rotors. Pretty nice kit for the price.
4Runner Owners Registry
- Thread starter Lifestyle Overland
- Start date
Advocate II
Sort of? It’s developed a pull to the right that has gotten more noticeable lately. There was one day when my brakes made a grinding sound and braking vibrated the vehicle for the rest of the trip, seemed to be located passenger front. Ever since I’ve had a stronger pull to the right at highway speeds. As far as I can tell that has to be a seized or partially sticking caliper. I’ve had caliper issues before and this was pretty much what it felt like.
Going to get my alignment tuned in a month or so just to rule it out, then probably will year into the brake stuff next.
Yeah sounds like a stuck caliper to me. Good luck the 4runner is pretty easy on that regard though
Advocate II
Yep. It’s way easier than my old f250. Brakes are pretty straightforward on these.
Traveler I
Hey everyone name is Taylor, new to this forum! My rig is a 2006 4Runner Limited 4.0L 6CYL, currently stock but plans are to install OME lift and Falken Wildpeak AT3W 265/70/18 tires in the spring.
Member III
Welcome!!Hey everyone name is Taylor, new to this forum! My rig is a 2006 4Runner Limited 4.0L 6CYL, currently stock but plans are to install OME lift and Falken Wildpeak AT3W 265/70/18 tires in the spring.
Advocate II
Welcome from another 4th gen owner! The 4th gens are becoming rarer...its great when people still show them love!
Traveler I
Totally agree. Mine I stock now but planning on a lift and tires in the spring and can’t wait to see how she looks!
Influencer II
4th gen! 2006 V8 192,000 miles young.
Pathfinder III
Traveler I
I don't believe I ever listed in here. Purchased back in June. 2018 TRD from the dealership. Did the TRD Pro suspension with a little extra spacer up front and T13 springs in the rear. Falken Wildpeaks on Level 8 wheels.
Instagram: https://www.instagram.com/twistedjake503/
Instagram: https://www.instagram.com/twistedjake503/
Stock 2019 4runner TRD Off Rd Premium
KDSS, only dealer upgrade was the Nitto Ridge Grapplers. More mods to come.
Here is last weeks picture at the dealership ready for pick up...
KDSS, only dealer upgrade was the Nitto Ridge Grapplers. More mods to come.
Here is last weeks picture at the dealership ready for pick up...
Attachments
Member III
Traveler I
Build looks great! How are you liking the wildpeaks? Planning on getting those in the spring.I don't believe I ever listed in here. Purchased back in June. 2018 TRD from the dealership. Did the TRD Pro suspension with a little extra spacer up front and T13 springs in the rear. Falken Wildpeaks on Level 8 wheels.
Instagram: https://www.instagram.com/twistedjake503/
Don't seem to see many 1st gens here, so here's mine.
85 4Runner. Solid axle, 22R
Fresh motor rebuild
OME lift
Fixed some rust, Raptorlined.
Have a Tepui RTT.. currently on my Jeep until I get my roof rack setup.
Too many improvements to list. Truck was a worn out shell... it's about halfway there. I hope to some day have the confidence to drive it long distances.
85 4Runner. Solid axle, 22R
Fresh motor rebuild
OME lift
Fixed some rust, Raptorlined.
Have a Tepui RTT.. currently on my Jeep until I get my roof rack setup.
Too many improvements to list. Truck was a worn out shell... it's about halfway there. I hope to some day have the confidence to drive it long distances.
Enthusiast III
Fairly new to this forum. The name is Noah and I have a 2004 SR5 T4R, V8.I haven't done a whole lot to the rig yet. Everything is planned out; just need to get the funds, now. So far I've done the following:
- Upgrade to Cooper Discoverer 255/70/17
- 1" Front strut spacer (love the leveled rake look)
- Runningboard delete
- Installed OB Emblem
Last edited:
Enthusiast III
2018 TRD Off-roadICON Stage 5
BFG 285/70 17 on ICON Wheels
Just starting more to come.
2018 ORP
Toytec Boss25
275/70/17 KO2 on TRD PRO wheels
Toytec sliders
Pics and build thread to come.
Toytec Boss25
275/70/17 KO2 on TRD PRO wheels
Toytec sliders
Pics and build thread to come.
Traveler I
Fresno Ca, 2017 TRD. My first post here aside from the new member forum quite some time ago. Only mods so far are RCI rock sliders and RCI Aluminum Skid plates. Already purchased an Icon Stage 7 that will be installed in the next few days. Anyone here in the central valley area want to go wheeling some time send me a msg. Not to good at the about me stuff lol
