2008 Suzuki SX4 Adventure Build
- Thread starter Explore Maine
- Start date
-
Guest, we will be conducting site maintenance August 4th and some downtime is expected. At this time Rally Point and the Member Map will also become an app-only feature for long-term security and stability. A few days after this maintenance, a major upgrade revision to the forum site will occur.
Influencer II
This thread keeps getting more and more awesome! [emoji106][emoji106]
Sent from my Samsung S7 using OBTalk app
Sent from my Samsung S7 using OBTalk app
Influencer II
How much ground clearence does your SX4 have? I feel my 05 Hyundai Tucson with only 7" of ground clearence from stock.
Sent from my Samsung S7 using OBTalk app
Sent from my Samsung S7 using OBTalk app
Just went through your build thread.
What made you change you mind to have the pod lights mounted on your roof rack? I noticed you posted that you remove your roof rack every winter.
I originally mounted them under the bumper but as you can see it didn't work out to well, as far as the rack goes I'm just going to leave it on.
View attachment 33590
The lowest point on my car is the catalytic converter. The ground clearance was 5.75" before the springs. The new ground clearance is 7 11/16"
this was this weekends project! I decided to paint the door sills so when I step on them to get something off my rack I won't slip.
View attachment 33591 View attachment 33592 View attachment 33593
View attachment 33591 View attachment 33592 View attachment 33593
Influencer II
I'll use this thread for inspiration for my rig if you don't mind. :)
Oh ok that's something
ok that is something I need to look out for then is the centre lock standard on the 4wd
yes all of the AWD SX4 have the center lock
here's another quick diy project I decided to do over the long weekend.
View attachment 33670 View attachment 33669
View attachment 33670 View attachment 33669
My diy limb riser project is under way!
I still need to drill a couple of small holes to add some self tapping screws to help secure the wire hangers and then I will be moving on to the rack.
View attachment 33833 View attachment 33834 View attachment 33835 View attachment 33836 View attachment 33837
I still need to drill a couple of small holes to add some self tapping screws to help secure the wire hangers and then I will be moving on to the rack.
View attachment 33833 View attachment 33834 View attachment 33835 View attachment 33836 View attachment 33837
Influencer II
I did a little painting and got the guy-wire measured out just got to get the rack mounts welded.
View attachment 34050 View attachment 34051 View attachment 34052 View attachment 34053 View attachment 34049
View attachment 34050 View attachment 34051 View attachment 34052 View attachment 34053 View attachment 34049
Sweet Suzuki! Love your mods, got some inspiration for my own Sukie :)
View attachment 34593 View attachment 34594 View attachment 34595 View attachment 34596 View attachment 34597 View attachment 34598 Project update!
I got the rack scraped,sanded and wire brushed. I also added a couple of tie down points and then I degreased and washed the rack to get ready to paint.
I got the rack scraped,sanded and wire brushed. I also added a couple of tie down points and then I degreased and washed the rack to get ready to paint.
