do you ever have an issue with the rear spring spacers slipping and somtimes dislodging
 
do you ever have an issue with the rear spring spacers slipping and somtimes dislodging
I haven't yet but ive been thinking about tack welding them in to prevent it. Mine will only move about 3 inches before the bump stops will stop the spacers from coming all the way off.
 
I haven't yet but ive been thinking about tack welding them in to prevent it. Mine will only move about 3 inches before the bump stops will stop the spacers from coming all the way off.
I’ve had some issues I actually had the spring slip off of spacer. I couldn’t find anyone that made any thing different so I had someone make a new one I’m testing now . I’ve also had the bushing in one of the camber adjusters come apart probably going to go with a Autozone one of those they look better made than the fancy aluminum ones that came with the lift
 

Attachments

  • 267F120A-944E-4FAF-A12F-62A2EBC5A477.jpeg
    267F120A-944E-4FAF-A12F-62A2EBC5A477.jpeg
    436.8 KB · Views: 57
  • 9E8412D2-1BDE-42AB-B422-403BF08FD424.jpeg
    9E8412D2-1BDE-42AB-B422-403BF08FD424.jpeg
    374.5 KB · Views: 59
  • 75CC66D0-0D2B-49B9-9B10-5810F284446E.jpeg
    75CC66D0-0D2B-49B9-9B10-5810F284446E.jpeg
    473.9 KB · Views: 54
_2AG6514%201-X2.jpg


_2AG6515%201-X2.jpg


_2AG6498%201-X2.jpg


_2AG6502%201-X2.jpg


3AG_8135-X2.jpg


IMG_7353-X2.jpg
 
Hey, love the build and all the videos!

How’d you route the exterior wiring for the rack leds? Did you go under the roof rail forward and down under the windshield molding or did you go rearward and then in through the grommet near the top of the rear door? Ours is a 2012, but I imagine the routing would likely be similar.
Did you switch the rear leds separate from the front or just one switch for all the roof rack leds?

Thanks in advance and again, love the build.
 
Hey, love the build and all the videos!

How’d you route the exterior wiring for the rack leds? Did you go under the roof rail forward and down under the windshield molding or did you go rearward and then in through the grommet near the top of the rear door? Ours is a 2012, but I imagine the routing would likely be similar.
Did you switch the rear leds separate from the front or just one switch for all the roof rack leds?

Thanks in advance and again, love the build.
I routed the wire down the back under the rear hatch and in through the tail light wiring grommet. I have separate switches for the front and rear LEDs.
 
OP where are you bro? Need some more ideas from you.
I really want to lift my 05 after putting on four Toyo Open Country AT3s. It looks pretty good right now, but it looks like she's squatting.
Do you have any suggestions? P.S. I do plan to swap-out the rear shocks as soon as possible.
 
OP where are you bro? Need some more ideas from you.
I really want to lift my 05 after putting on four Toyo Open Country AT3s. It looks pretty good right now, but it looks like she's squatting.
Do you have any suggestions? P.S. I do plan to swap-out the rear shocks as soon as possible.
I am here LOL. The best way to stop a saggy rear is with air springs.

 
  • Like
Reactions: 05XPeyelutt