What Did You Do With Your Rig Today?

[Sparksalot]

And done , lot of welding to go from a flat box to a bumper View attachment 282161View attachment 282162

Which bumper kit is that?

 

[Smileyshaun]

Which bumper kit is that?

Victory 4x4

 

[HufferFish]

Today drove into Downieville,CA. Grabbed a shuttle up to 7000' and bombed down approximately 4000' in 15 miles on my mountain bike. Epic.
Yesterday, I wheeled myself and a friend up to the Sierra Butte fire tower. Unfortunately We got a good look of the Gold Complex Fire that started earlier in the day.

 

[WYWander]

Took off the tire/wheel, brake caliper, and rotor...only to find out the noise maker was a plastic piece in the wheel well and not a rock rubbing the rotor.

 

[grubworm]

getting it ready for a trade in...

 

[roots66]

getting it ready for a trade in...

View attachment 282313 View attachment 282314

Sure you don't want the Fisker Alaska?

 

[El-Dracho]

Took the trail less travelled today...

 

[Outdoordog]

Got my jeep back!
Finally got the suspension put on, wheels and tires.

 

[kevine001]

For any GFC owners, double check the bolts on the mounting brackets. I bought mine used in late May and mounted myself. Been on one trip, maybe a few hours away. Checked brackets this weekend, one very loose, the other three wrench loose. The bolts going into the OEM bed rail were all wrench loose. I may consider using Loctite on them before I take it on another trip.

 

[roots66]

Update: Finally got them installed....after a 4 hour wait. Anyway, I replaced the MT's with AT's because they are quieter, ride smoother, last longer and cost less. Besides, at least 95% of my tire wear is on road anyway, so why waste the tread just because it looks more off-roady?

 

[CORam]

I like that setup. What are those brackets holding the 4x4? This would allow me to setup on the lawn with some flatter ground.

I am wondering the same thing.

 

[roots66]

Came real close to being t-boned when some lady totally ran a red light. Made a nice change from the homeless people just jumping out in front of me, though.

 

[Sparksalot]

Ventilated the hood on thethirdtwin this morning.

 

[North American Sojourner]

Ventilated the hood on thethirdtwin this morning.

View attachment 282841View attachment 282842View attachment 282843View attachment 282844View attachment 282845

Where'd you pick that up at? I gotta have one.
Not for my rig. I have other things for it.
Zim

 

[Sparksalot]

Where'd you pick that up at? I gotta have one.
Not for my rig. I have other things for it.
Zim

It’s the H3 louver from Rodlouvers. Comes in bare aluminum.

 

[North American Sojourner]

It’s the H3 louver from Rodlouvers. Comes in bare aluminum.

Thanks for that.
Zim

 

[danwyandt]

Noticed the front end getting a bit wonky in the curves.

Found it.

 

[WYWander]

Replaced the front “Anytime” camera and harness. The old harness had gone bad.

 

[lookin4dirt]

Sequential turn signals in the mirrors

 

[JCross]

I'm going to turn this into a dual swing out to accommodate my jerry can holder.