Influencer III
- 4,312
- First Name
- Rex
- Last Name
- Drake
- Member #
19540
- Ham/GMRS Callsign
- KI5GH
- Service Branch
- Air Force
What Did You Do With Your Rig Today?
- Thread starter iamout
- Start date
Member III
Enthusiast III
Today drove into Downieville,CA. Grabbed a shuttle up to 7000' and bombed down approximately 4000' in 15 miles on my mountain bike. Epic.
Yesterday, I wheeled myself and a friend up to the Sierra Butte fire tower. Unfortunately We got a good look of the Gold Complex Fire that started earlier in the day.
Yesterday, I wheeled myself and a friend up to the Sierra Butte fire tower. Unfortunately We got a good look of the Gold Complex Fire that started earlier in the day.
Attachments
Took off the tire/wheel, brake caliper, and rotor...only to find out the noise maker was a plastic piece in the wheel well and not a rock rubbing the rotor. 
getting it ready for a trade in...
Off-Road Ranger I
- 3,507
- First Name
- Mike
- Last Name
- Roots
- Member #
16968
- Ham/GMRS Callsign
- GMRS: WSGB862
- Service Branch
- USAF Spook
Sure you don't want the Fisker Alaska?
Protector III
- 14,131
- First Name
- Bjoern
- Last Name
- Eldracher
- Member #
20111
- Ham/GMRS Callsign
- DC3BE
Member III
Got my jeep back!
Finally got the suspension put on, wheels and tires.
Finally got the suspension put on, wheels and tires.
For any GFC owners, double check the bolts on the mounting brackets. I bought mine used in late May and mounted myself. Been on one trip, maybe a few hours away. Checked brackets this weekend, one very loose, the other three wrench loose. The bolts going into the OEM bed rail were all wrench loose. I may consider using Loctite on them before I take it on another trip.
Attachments
Off-Road Ranger I
- 3,507
- First Name
- Mike
- Last Name
- Roots
- Member #
16968
- Ham/GMRS Callsign
- GMRS: WSGB862
- Service Branch
- USAF Spook
Update: Finally got them installed....after a 4 hour wait. Anyway, I replaced the MT's with AT's because they are quieter, ride smoother, last longer and cost less. Besides, at least 95% of my tire wear is on road anyway, so why waste the tread just because it looks more off-roady?
Anyway, I replaced the MT's with AT's because they are quieter, ride smoother, last longer and cost less. Besides, at least 95% of my tire wear is on road anyway, so why waste the tread just because it looks more off-roady?
Last edited:
Off-Road Ranger I
- 3,507
- First Name
- Mike
- Last Name
- Roots
- Member #
16968
- Ham/GMRS Callsign
- GMRS: WSGB862
- Service Branch
- USAF Spook
Came real close to being t-boned when some lady totally ran a red light. Made a nice change from the homeless people just jumping out in front of me, though.
Influencer III
- 4,312
- First Name
- Rex
- Last Name
- Drake
- Member #
19540
- Ham/GMRS Callsign
- KI5GH
- Service Branch
- Air Force
Ventilated the hood on thethirdtwin this morning.
Member II
- 4,129
- First Name
- Dave
- Last Name
- Zimmer
- Member #
30139
- Ham/GMRS Callsign
- WRXV870
- Service Branch
- USN Retired
Where'd you pick that up at? I gotta have one.
Not for my rig. I have other things for it.
Zim
Influencer III
- 4,312
- First Name
- Rex
- Last Name
- Drake
- Member #
19540
- Ham/GMRS Callsign
- KI5GH
- Service Branch
- Air Force
It’s the H3 louver from Rodlouvers. Comes in bare aluminum.
Member II
- 4,129
- First Name
- Dave
- Last Name
- Zimmer
- Member #
30139
- Ham/GMRS Callsign
- WRXV870
- Service Branch
- USN Retired
Trail Mechanic III
- 6,159
- First Name
- Daniel
- Last Name
- Wyandt
- Member #
29878
- Ham/GMRS Callsign
- WRTJ513
Replaced the front “Anytime” camera and harness. The old harness had gone bad.
Contributor III
Enthusiast III
