What Did You Do With Your Rig Today?

  • HTML tutorial

MOAK

Rank V
Launch Member

Off-Road Ranger I

2,865
Wernersville Public Library, North Reber Street, Wernersville, PA, USA
First Name
Donald
Last Name
Diehl
Member #

0745

Ham/GMRS Callsign
WRPN 506
With 371,000 mile on the cruzer it is time to replace the steering box. I got as far as removing the drag link ball joint without damaging it, removing the shield that protects the steering shaft universal and giving the bolts on the universal plenty of penetrating lubricant. Now I wait 24 hours to remove those two bolts. If they break, I'd be SOL, so patience is key.
 

El-Dracho

Ambassador, Europe
Moderator
Member
Supporter
Investor

Inventor I

13,232
Lampertheim, Germany
First Name
Bjoern
Last Name
Eldracher
Member #

20111

Ham/GMRS Callsign
DO3BE
With 371,000 mile on the cruzer it is time to replace the steering box. I got as far as removing the drag link ball joint without damaging it, removing the shield that protects the steering shaft universal and giving the bolts on the universal plenty of penetrating lubricant. Now I wait 24 hours to remove those two bolts. If they break, I'd be SOL, so patience is key.
What is wrong with the steering box? Is it leaking? Good luck with the removal!
 

MOAK

Rank V
Launch Member

Off-Road Ranger I

2,865
Wernersville Public Library, North Reber Street, Wernersville, PA, USA
First Name
Donald
Last Name
Diehl
Member #

0745

Ham/GMRS Callsign
WRPN 506
What is wrong with the steering box? Is it leaking? Good luck with the removal!
ya, leaking a lot and the steering was little on the loose side causing a bit of wandering. I was able to find one that has only 150,000 miles on it and no leaks. I'll get that in along with new hoses and all will be good. It's a pretty simple job as long as no bolts get broken. Ha! Interestingly it didn't start leaking until we got home from our trip up to the Arctic.
 
  • Like
Reactions: El-Dracho

PapaDave

Local Expert Northern ID and North East WA
Member

Protector II

8,868
Coeur d'Alene, ID, USA
First Name
Dave
Last Name
Addington
Member #

10123

Ham/GMRS Callsign
KN6BKH
I added a Propex propane exchange heater for my roof top tent. I used two Fat 50cal ammo cans, cut the bottoms off, extended them with sheet metal and mounted them between my rack and rear window of my cab. I purposefully left room there when I set up my rack. The heater is mounted inside and the hosing is all attached and ready to extend up to the window.

I wired up power from my truck and the control panel is mounted to a project box and lives in the tent. I picked up a window tent pass-through off Etsy and we are warm all night long up here at the top of the USA! Pictured is my KB Voodoo Rack that mounts over my tonneau cover and makes removal easy when I’m not off roading.

0AECCAE8-F17E-41AE-9D93-A246769038F6.jpegFE06C348-B4EF-45EA-8EF8-861D2163C4BD.jpeg5AD29632-EC10-4638-9BBD-6E0B0971788E.jpegEE4B3540-A857-43BD-9615-9FC032906379.jpeg0B644F14-2CA3-4B27-855A-2648868F1B3B.jpegF8BBDFB2-C271-43FC-BE36-2ADAF7882B29.jpeg
 
Last edited: