
Enthusiast III
My goal is to have 2 batteries (Battle Born 100aH LifePO4), shore power (NOCO GEN 2 20amp charger), Solar and 12V DC to DC charger (REDARC BCDC1225), inverter (Xantrex 2000) and a fuse box to have wiring run to various areas of the trailer. I've looked at multiple pictures of setups here on the forum and the cleanest looking setup is the perforated aluminum mounted to the back of the box like Turtleback does on their trailers. Does anyone have a similar setup? I'm guessing their are standoffs mounting the perforated aluminum to the box with through bolts and everything else is just bolted to the aluminum.
What thickness of perforated aluminum should I use?
What should I use as the standoffs?
How should I mount the batteries to the box?
Is there an issue with mounting the Inverter sideways (I don't have enough box height to mount it vertically.
Here are some photos I've been collecting from the forum for ideas.



What thickness of perforated aluminum should I use?
What should I use as the standoffs?
How should I mount the batteries to the box?
Is there an issue with mounting the Inverter sideways (I don't have enough box height to mount it vertically.
Here are some photos I've been collecting from the forum for ideas.



Attachments
-
274.1 KB Views: 172