Hey guy, looking for ideas on for roof top fuel container, holder for Toyota 4runner with Gobi rack.. Thanks for your feedback!!
Roof top fuel carrier for 4 Runner
- Thread starter Ross
- Start date
I am using Rotopax and Rotopax Lox with my Gobi Roof rack. I love how its low profile. You should ook into it.
Interesting.. I've got the exact maxtrax.. I couldn't get all four holders in place due to the tight fit, so I have one maxtrax holder that is locked and the other three handles ziptied to the rack.. I used the heavy duty ones.. I keep a few extras, but it's easy to cut them if I need to get them off, which has only been once.. What size cans are those?
awesome! For my maxtrax I just used two frontrunner tie downs. The Rotopax I have are the 2 gallon ones. They have 1, 2 and 4 gallon pax.
Sent from my iPhone using OB Talk
Sent from my iPhone using OB Talk
Influencer II
Hmm gonna look into this for my flat baja rack, awesome thread n pics [emoji106] [emoji106] [emoji106]
Sent from my SM-G935V using Tapatalk
Sent from my SM-G935V using Tapatalk
Here is my cheap setup for my traction boards. A scepter 5gal jerry just gets strapped to roof rack.
Sent from my SAMSUNG-SM-G870A using Tapatalk
Here is my cheap setup for my traction boards. A scepter 5gal jerry just gets strapped to roof rack.
Sent from my SAMSUNG-SM-G870A using Tapatalk
Interesting. Do you have any other photos on how you connected the maxtrax to the Gobi Ladder? When I eventually add a rooftop tent on my rack, Im trying to look at other alternatives to mounting my maxtrax. This might be the solution. Thank you
I'll take some updated photos later today after work.
Sent from my SAMSUNG-SM-G870A using Tapatalk
Sent from my SAMSUNG-SM-G870A using Tapatalk
So after searching far and wide for an affordable solution for mounting and mounting on the ladder where I had easier access, I came up with this.
I had excess 1 inch pvc conduit lying around and went to work. I used plumbers glue on the interior/hatch side of the backpipe, elbows and side pipes. I left the front elbows and pipe untouched so that I can slide on and off easily. I drilled holes and used coder pins to secure the traction boards in place. I used crossed zip ties to hold the pvc devices on the ladder once I had it lined up because I didn't want to drill into the ladder. I just wrapped the piping with black tape. It's ghetto but it works well, it's served multiple offroad events and a winter, and it was free.[emoji106]
Sent from my SAMSUNG-SM-G870A using Tapatalk
One thing to note, the 4runner hatch struts do fine with the gobi ladder, but adding the traction boards prevents it from staying raided on its own. I got the HD struts from lift supports depot. They're inexpensive compared to Gobi and they're great.
So after searching far and wide for an affordable solution for mounting and mounting on the ladder where I had easier access, I came up with this.
I had excess 1 inch pvc conduit lying around and went to work. I used plumbers glue on the interior/hatch side of the backpipe, elbows and side pipes. I left the front elbows and pipe untouched so that I can slide on and off easily. I drilled holes and used coder pins to secure the traction boards in place. I used crossed zip ties to hold the pvc devices on the ladder once I had it lined up because I didn't want to drill into the ladder. I just wrapped the piping with black tape. It's ghetto but it works well, it's served multiple offroad events and a winter, and it was free.[emoji106]
Sent from my SAMSUNG-SM-G870A using Tapatalk
Sent from my SAMSUNG-SM-G870A using Tapatalk
So after searching far and wide for an affordable solution for mounting and mounting on the ladder where I had easier access, I came up with this.
I had excess 1 inch pvc conduit lying around and went to work. I used plumbers glue on the interior/hatch side of the backpipe, elbows and side pipes. I left the front elbows and pipe untouched so that I can slide on and off easily. I drilled holes and used coder pins to secure the traction boards in place. I used crossed zip ties to hold the pvc devices on the ladder once I had it lined up because I didn't want to drill into the ladder. I just wrapped the piping with black tape. It's ghetto but it works well, it's served multiple offroad events and a winter, and it was free.[emoji106]
Sent from my SAMSUNG-SM-G870A using Tapatalk
I like it!I might just have to do this once i put a roof top ten on my rack, since I wont have space on the top anymore. Thank you for sharing. Looks good!. Its free and it works. Awesome!
Pathfinder III
I would think about a different place for you Hi-Lift. If you were to get in an accident you might find it in your lap. That is a lot of metal to have going though the windshield.
Just a thought.
Sent from my XT1650 using OB Talk mobile app
I've been told lol I really like it there though and it doesn't budge what so ever...Be cool if they did a crash dummy test with it though!<br /><br /><br />Smitty bilt<br /><br />Sent from my Pixel using OB Talk mobile app
I would think about a different place for you Hi-Lift. If you were to get in an accident you might find it in your lap. That is a lot of metal to have going though the windshield.
Just a thought.
Sent from my XT1650 using OB Talk mobile app
Sent from my Pixel using OB Talk mobile app
I created a cheap low profile rack using Uni Strut and some anti vibration mounts from McMaster Carr. You can see more info in my build thread.
