Influencer I
You don't any hassle from police with the rearward bar do you? I had a shell installed on my Frontier and would like to have some rearward light up high like that. Wondering if it's worth it or not from the 5-0 stand point.
Rig Lighting
- Thread starter ILLFOZZ
- Start date
You don't any hassle from police with the rearward bar do you? I had a shell installed on my Frontier and would like to have some rearward light up high like that. Wondering if it's worth it or not from the 5-0 stand point.
madcratebuilder
Rank V
Pathfinder I
Here's a link to the remote. Simple to wire, it activates the relay, I used a 5 amp fuse on the power feed. The fob has a sliding cover so you do not turn on the lights by accident.
Enthusiast III
I run KC G46's as auxiliary driving lamps up front and KC C2's for scene lights in the rear. I also added extra reverse lights in the empty chambers in my tail light housings and replaced the cabin bulbs with 120-lumen LED bulbs. I have ambitious upgrade plans but I want to fab my own roof rack first.
Steward I
Only light bar I have right now is my Rough Country 30” curved clack series bar, controlled with the MFC power distribution center. I definitely plan to get more though once I get a better idea in my head about how I want to continue to modify my jeep.
World Traveler III
Been dying to get for Christmas the adapt by rigid industries
Traveler III
Have a pair of Caliraised ditch lights. Used their harness and bracket. Once I get a roof rack, like to do some some surrounding, help with camp set up at night.
Finally added my new lights thanks to a break in this rainy weather 
I got Spot and Flood 9inchers on front bumper at 185W each, a spot "fog" single row 90W 20inch bar mounted low under bumper, and two rear small floods fit in the rear bumper. Still to mount two windshield corner cube lights.
Advocate III
Great looking rig!My current setup is TruckLite LED headlights that I've been running for 5 years (they've been great), the stock fog location houses KC HiLites Gravity Series LEDs, above those on the fairlead brackets is a set of BajaDesigns Squadron Pro's with Amber covers. I love these lights! On the A Pillar is a set of Squadron Sports in the cornering pattern as ditch lights. I've got 2 KC HiLite cubes on the rear for reverse/scene lighting.
Member III
- 2,771
- First Name
- Rolando
- Last Name
- Nispiros
- Member #
17011
- Ham/GMRS Callsign
- KN6JJS
Not much but it helps. I have the cover over my 20” light bar like 99.99% of the time.
Pod lights on grill
HID with projectors
20” TrailFx Light Bar
HID fogs
LED tailgate bar and LED strobes (not lit in pic)
Pod lights on grill
HID with projectors
20” TrailFx Light Bar
HID fogs
LED tailgate bar and LED strobes (not lit in pic)
Member II
Member II
Great thread. Giving me ideas. Looking to put 2 6” KC Daylighters on my bumper and Some Daylighters on the roof when the weather gets better.
Knochel
Rank 0
Contributor I
Does anyone have a setup for rear lights on top of a First Gen Xterra? I’ve already installed pods in the bumper.
World Traveler III
Knochel
Rank 0
Contributor I
John, where and how did you mount the two rear 3" lights? What type are they? -OLAF
Boostpowered
Rank VI
Member III
Just 4 cheap ditch lights on homemade hood mounts, then all head and tail lights have been converted to led
Traveler II
I wanted long throw lights so I went with 7" HID spots on the bumper. I've had a similar 4" HID light on my TJ for 10 years and absolutely love them. Filled the light holes in the ARB with amber LED fog lights for a JK.
Last edited:
