Pathfinder I
Next steps today on the lighting setup. Installed two Amber cube lights on the rear of the roof rack for dust running lights that match the form factor of my rear facing work lights.Overlanding Raptor Build
- Thread starter Ncat
- Start date
Next steps today on the lighting setup. Installed two Amber cube lights on the rear of the roof rack for dust running lights that match the form factor of my rear facing work lights.
Pathfinder I
I installed the Builtright Industries dash mount with the X-Mount arm and attachment point. for managing my devices such as my iPad for Gaia, iOverland, etc., and another arm on the way for my CB mic mount.
Pathfinder I
I got the Rhino Rack Maxtrax mounts installed today on my Yakima Mega Warrior basket.
Nice build. I am considering the Raptor as my next vehicle. It is probably a bit more nimble than my F-250.
Pathfinder I
Hi Andrew, thanks! I have to say this thing seriously impressed me. It is a bit big now and again, but 95% of the time it’s amazing
Yes and no keep in mind raptors are 7" wider than a standard full size truck, so its like driving a dually around.
Last edited:
I have way more experience riding off-road on motorcycles. Riding around in Colorado and New Mexico typically involved roads with switchbacks. I am sure I could manage it in my truck with a bit of back and forth, but it might be a PITA if I decide to go the trailer route with the family. The Turing radius of a Raptor would surely be better.
mjherron
Rank V
Member III
mjherron
Rank V
Member III
Ncat, I have a couple of question regarding your iPad setup and I also have the Builtright Industries mounting system as well.
1. Depending on the type of iPad you have, is the mount solid? I am planning on mounting my iPad Pro 9.7” the same way as you.
2. I’m also assuming that there may or may not be a bit of obstruction of view with the location of the iPad, so just wondering if you’ve had issues there?
Thank you for the information in advance!
1. Depending on the type of iPad you have, is the mount solid? I am planning on mounting my iPad Pro 9.7” the same way as you.
2. I’m also assuming that there may or may not be a bit of obstruction of view with the location of the iPad, so just wondering if you’ve had issues there?
Thank you for the information in advance!
Pathfinder I
Pathfinder I
Pathfinder I
Hi, I was running the x-mount on a suction cup to the windshield before. There is some blockage, but minor and never an issue. However, I would take it off when not off roading. Switching to the hard mounted solution is solid and no movement. It brings it forward and lower, so easier to reach and actually improved the visibility over the suction mount location.
I am running the iPad Mini in a ruggedized Pelican case and find the form factor better for visibility. I tried to use my iPad Air and found it to unstable and big on the suction mount. I have not tried the larger iPad on the fixed solution. I bought this iPad specifically for my Overlanding apps and use in camp and am extremely pleased with the form factor and setup.
mjherron
Rank V
Member III
Pathfinder I
I am very excited, just ordered my BFG KM3’s and scheduled my lift install. Stand by for pictures in the next couple weeks!
Pathfinder I
Pathfinder I
Finally got the lift done! 2.5” lift coupled with the new BFG KM3’s makes a great stance. I am quite pleased. So far the ride is good and it drives nice. The tires are a bit louder for sure, but not obnoxious I need to get better pics this weekend, but here are a couple quick shots.
Influencer II
can you post a link to this mount? I looked and didn't find anything like with screw knob. Thanks
QUOTE="Ncat, post: 289118, member: 23707"]View attachment 81237 View attachment 81236
I got the Rhino Rack Maxtrax mounts installed today on my Yakima Mega Warrior basket.[/QUOTE]
QUOTE="Ncat, post: 289118, member: 23707"]View attachment 81237 View attachment 81236
I got the Rhino Rack Maxtrax mounts installed today on my Yakima Mega Warrior basket.[/QUOTE]
Pathfinder I
[/QUOTE]
They are the Rhino Rack Pioneer MaxTax Flat Bracket. I ordered them off Amazon. I had to use a flat piece of metal to Mack a backing for the mount plates to sandwich it to my Yakima MegaWarrior rack. A bit of fab, but it works great!
