Nissan Frontier PRO-4x Build

I have a '14 Frontier pro4x and love it. Can't beat the highway ride and handling considering the off road capabilities. Get some good skids and sliders and you will be amazed where it can go when you don't have to worry as much about what you are dragging it over.
 
I've got a 2015 Frontier, same story having a hard time finding after market upgrades.
 
Zerobird said:
Nisstec & PRG are your 2 best companies that offer Nissan suspension parts. For Armor, Hefty fabworks, Shorckworks, maxgear, P&P and there are a few smaller companies out there as well. Not as much out for Nissan as Toyota or Jeep.
Click to expand...
Thanks for the info, I'll check them out.
 
I have a 2010 pro4x... I thought I was in the clear on SMOD. I guess I'll be doing the bypass until I can scrounge for a new radiator.... I have big plans for my rig too. I'm gonna build it out with an AT Habitat and a similar setup to what Jon Burt had with his flip pac, but first things first....
 
Wishyouwerehere said:
I have a 2010 pro4x... I thought I was in the clear on SMOD. I guess I'll be doing the bypass until I can scrounge for a new radiator.... I have big plans for my rig too. I'm gonna build it out with an AT Habitat and a similar setup to what Jon Burt had with his flip pac, but first things first....
Click to expand...
With a 2010 you should be in the clear, when I was a tech for Nissan the SMOD affected vehicles were mainly 05-07. I don't recall anything being 09+.
 
I had a 2014 Pro-4X with Shrockworks skid plates, sliders, and OME rear springs. Had new front struts installed at 4WP for a 2-inch lift on 33 tires. Worked great - much better than the front strut spacer with rear spring block I had originally.
Traded it off and now looking to get another one!!!
DSCF0031.JPG
 
  • Like
Reactions: Overland_Serenity and Jimmy P
You must log in or register to reply here.
Top Bottom