Friday Night HAM Radio NET

Perfect. I'll have to see if I can make this.

Thanks!

73
 
  • Like
Reactions: Unbound4R
I'll do all I can to make it. It is at 7PM so that is in the middle of a trasit time.
 
@Prerunner1982 any chance you can help to get more interest in this net.
 
  • Like
Reactions: Unbound4R
KD7WCD said:
I'll do all I can to make it. It is at 7PM so that is in the middle of a trasit time.
Click to expand...

This is why I’ve got it on EchoLink and Allstar this time around. Lots of ways to connect with that combination and you can ask your local repeater to connect to the AllStarLink. My local repeater invited me to connect to their reapeter during it.
 
  • Like
Reactions: Prerunner1982 and KD7WCD
Unbound4R said:
Hi everyone,

Getting everything finalized for the net this Friday! Just a quick heads-up that I needed to update the connection details I previously shared due to some tweaks during testing and a correction on my initial information. Please make sure to check the connection details below carefully before joining the net.

Looking forward to chatting with you all as we work on bringing some life back to this net!

Connection Details:
  • EchoLink Node: W6UXD-R (Node 448622)
  • Allstar Node: 64658
Connecting via Allstar: Allstar users can connect to node 64658. If you are using a connected radio, you will typically dial *3 followed by the node number (e.g., *364658) to connect. If you are using an Allstarlink interface on your computer, you can usually enter the node number directly.

EchoLink Information: If you're new to EchoLink, you'll need to register your call sign with EchoLink and have your license validated by them. Once that's done, you can connect using their software on your phone, tablet, or computer.

Why the change? To make the net accessible to a wider audience, including those on Allstar, we're using both EchoLink and Allstar. It's important to note that EchoLink's rules prevent conference nodes from being directly linked to other VoIP systems.
Click to expand...

Is W6UXD-R only visible when when the net is active. I passed the word around and someone reached out saying they don't see that node, even had them try 448622 with no luck.
Thank you
Jon
 
Prerunner1982 said:
Unbound4R said:
Hi everyone,

Getting everything finalized for the net this Friday! Just a quick heads-up that I needed to update the connection details I previously shared due to some tweaks during testing and a correction on my initial information. Please make sure to check the connection details below carefully before joining the net.

Looking forward to chatting with you all as we work on bringing some life back to this net!

Connection Details:
  • EchoLink Node: W6UXD-R (Node 448622)
  • Allstar Node: 64658
Connecting via Allstar: Allstar users can connect to node 64658. If you are using a connected radio, you will typically dial *3 followed by the node number (e.g., *364658) to connect. If you are using an Allstarlink interface on your computer, you can usually enter the node number directly.

EchoLink Information: If you're new to EchoLink, you'll need to register your call sign with EchoLink and have your license validated by them. Once that's done, you can connect using their software on your phone, tablet, or computer.

Why the change? To make the net accessible to a wider audience, including those on Allstar, we're using both EchoLink and Allstar. It's important to note that EchoLink's rules prevent conference nodes from being directly linked to other VoIP systems.
Click to expand...

Is W6UXD-R only visible when when the net is active. I passed the word around and someone reached out saying they don't see that node, even had them try 448622 with no luck.
Thank you
Jon
Click to expand...

Thank for letting me know. It looks like it was having issues connecting to the EchoLink servers. Fixed now.
 
  • Like
Reactions: Prerunner1982
Reminder: Ham Radio Net This Friday!
Join us for the Net on Friday, June 6th at 8:00 PM CST.
Connect via Echolink *Overland*, or use Allstar Node 64658.
We look forward to hearing you on the air!
 
Unbound4R said:
Yota_Jeff said:
I just got my callsign yesterday and plan to attend Aug 1st. See y’all then!

KR4FMZ
Click to expand...

Do you have EchoLink setup? Let me know if you need any help.
Click to expand...

Thanks! I believe I have it set up properly but I haven’t had a chance to test it out yet. I currently just have a cheap Beofang HT but I am pretty sure I can participate via the EchoLink app on my phone
 
Yota_Jeff said:
Thanks! I believe I have it set up properly but I haven’t had a chance to test it out yet. I currently just have a cheap Beofang HT but I am pretty sure I can participate via the EchoLink app on my phone
Click to expand...

Check this one out! Just dropped. Great radio for the price: Amazon.com
 
  • Like
Reactions: Yota_Jeff
Wotan said:
Yota_Jeff said:
Thanks! I believe I have it set up properly but I haven’t had a chance to test it out yet. I currently just have a cheap Beofang HT but I am pretty sure I can participate via the EchoLink app on my phone
Click to expand...

Check this one out! Just dropped. Great radio for the price: Amazon.com
Click to expand...

Thanks for sharing! I may have to pick that up next, great price too!
 
Yota_Jeff said:
Wotan said:
Yota_Jeff said:
Thanks! I believe I have it set up properly but I haven’t had a chance to test it out yet. I currently just have a cheap Beofang HT but I am pretty sure I can participate via the EchoLink app on my phone
Click to expand...

Check this one out! Just dropped. Great radio for the price: Amazon.com
Click to expand...

Thanks for sharing! I may have to pick that up next, great price too!
Click to expand...

Check out qrz.com they have a jump start program with GigaParts where you can get a descent handheld inexpensively. Very good deal.
 
  • Like
Reactions: Yota_Jeff
Is the net weekly? May consider going monthly to get it going. Is there a way to set up a calendar where people can sign up as net control?
 
  • Like
Reactions: Unbound4R and HaVeeBear
You must log in or register to reply here.
Top Bottom