2019 Colorado ZR2 Build

[dj_mccomas]

That's pretty snazzy. I ran my inverter to inside the cab, thinking about adding some solar panels.

Thanks man, super happy with it. Still need to figure out the best way to wire the brake light on the camper.

 

[madcratebuilder]

Thanks man, super happy with it. Still need to figure out the best way to wire the brake light on the camper.

I have a Softopper and I'm installing a 3rd brake light in it, state law here but seldom enforced. I'm not 100% sure but I think you need a black box. I've seen them on evel bay for $20 or so, haven't researched yet.

 

[dj_mccomas]

I have a Softopper and I'm installing a 3rd brake light in it, state law here but seldom enforced. I'm not 100% sure but I think you need a black box. I've seen them on evel bay for $20 or so, haven't researched yet.

Yeah, from what i've read a logic box, otherwise the third light will blink with flashers if you just tap into left or right brake wire from the reading I've done.

 

[dj_mccomas]

Insulated the walls and ceiling back in october, still need to get updated pics, but here's a few in process. Ordering OME rear leaf springs in a few weeks.

 

[OverlandDeparture]

Well, traded in my 2012 unlimited Rubicon 2 weeks ago, for this 2019 ZR2. I'm loving it so far even though it's only been driven on pavement so far. For the most part it will stay stock probably until sometime next year. I did decide to plasti dip badges and wheels black, and that turned out really good. First mod will be a console vault as I want a secure way to store my edc as needed.

how is the pasti dip holding up on the wheels? ive heard of guys doing this but always figured would peel really bad out on trails.

 

[dj_mccomas]

how is the pasti dip holding up on the wheels? ive heard of guys doing this but always figured would peel really bad out on trails.

Holding up fine so far, to be honest we haven't got to get on any trails yet. I think the key is prep, and putting it on thick enough for it to last.

 

[Boostpowered]

Welcome to the dark side. If you have questions about fitting 33s or a lift or anything in particular about the 2gen colorados , Pm me ive already went through it.

 

[dj_mccomas]

Welcome to the dark side. If you have questions about fitting 33s or a lift or anything in particular about the 2gen colorados , Pm me ive already went through it.

Thanks, appreciate it.

 

[dj_mccomas]

Finally got the camper brake light wired up. Some pics of the insulation and bungee storage.

 

[dj_mccomas]

My OME heavy duty springs came in finally. Removed old springs and spacers and got these installed yesterday. Removed spacer as I don't plan to level the front and didn't want it to have too much rake.

 

[dj_mccomas]

My father in-law helped me build out the rear seat delete, finished install today. Turned out great.

 

[dj_mccomas]

Small update, added bed rug finally.