• Guest, we are migrating the site today. There may be interruption of service.
  • HTML tutorial

2001 Land Rover D2

disco_unchained

Rank IV
Launch Member

Enthusiast III

Found my t case leak! Front seal was bad. View attachment 92005
Would love to know how far down you put the new one. I just replaced the front output bearing on mine to eliminate vibration, put a new seal in with it, and now I have a leak (didn’t before). I ordered another seal and will be doing it over again this weekend. I pushed it all the way down to the circlip and think that might have been too far to get a tight fit with the flange.
 

MattAnderson1986

Rank VI
Launch Member

Expedition Master I

Would love to know how far down you put the new one. I just replaced the front output bearing on mine to eliminate vibration, put a new seal in with it, and now I have a leak (didn’t before). I ordered another seal and will be doing it over again this weekend. I pushed it all the way down to the circlip and think that might have been too far to get a tight fit with the flange.
I seated it all the way down, I used a Brit part seal
 
Top