Roofnest Falcon XL Help

No Known Boundaries

No Known Boundaries

Rank VI
Launch Member

Influencer I

3,059
Western US
Member #

4037

I have a gen 1 falcon XL that I'm looking for a couple components on.

Firstly, I need a 450n set of struts with an extended length of 33". Roofnest CS said they weren't sure where to get them 'cause they've moved on to a different design for gen 2. :neutral:
Secondly, I'm looking for T nuts. The ones they linked me to cost $12 in shipping for a .48 part. These are 20mm x 13 x 5, and I can't find an equivalent at Fastenal or Amazon.

Anyone gone through this that can shed some light?
 
No Known Boundaries said:
Firstly, I need a 450n set of struts with an extended length of 33"
Click to expand...

Are you sure about that number (450nm)? I convert that to 331.9 foot pound. Depending on angle, those together will lift 500# or more. I'm assuming its for the lid.
Here's a link to some about the same length Struts I used a pair of 150# struts to lift my M-100 lid and RTT together.

No Known Boundaries said:
Secondly, I'm looking for T nuts. The ones they linked me to cost $12 in shipping for a .48 part. These are 20mm x 13 x 5, and I can't find an equivalent at Fastenal or Amazon.
Click to expand...

I can find 20mm Tee Nuts, the rest of the sizing you posted I'm not sure of. Are these going into a channel? If so, most slots are standard depth/width.
Tee Nuts
 
  • Like
Reactions: Boort
smritte said:
Are you sure about that number (450nm)? I convert that to 331.9 foot pound. Depending on angle, those together will lift 500# or more. I'm assuming its for the lid.
Here's a link to some about the same length Struts I used a pair of 150# struts to lift my M-100 lid and RTT together.



I can find 20mm Tee Nuts, the rest of the sizing you posted I'm not sure of. Are these going into a channel? If so, most slots are standard depth/width.
Tee Nuts
Click to expand...

Just Newtons, not Newton meters. N measures linear force, Nm is a torque factor. But I'll look at those struts. Likewise for the nuts, thanks.
 
  • Like
Reactions: smritte
Sigh.
I knew that. Didn't help that just before I was converting nm.
Nice thing is, you have the numbers. You just need to find a match.
 
I was on CVT's site earlier today and saw several struts and just went back and looked and one of them has 450n in the description but doesn't say the length, not sure if it's what you are looking for or even compatible but thought I'd share incase the competitors product would work.

The link will take you to the page they are on (Mt. Hood - Gas Strut (Single)-450N $45), for some reason when I click on the actual part I get a error on my browser.

Cascadia Vehicle Tents Parts + Pieces

CVT is the industry leader of Roof Top Vehicle Tents, Awnings and Car Camping Equipment for trucks and SUVs. Prepare for your next adventure today.
cascadiatents.com cascadiatents.com
 
  • Like
Reactions: No Known Boundaries
No Known Boundaries said:
I have a gen 1 falcon XL that I'm looking for a couple components on.

Firstly, I need a 450n set of struts with an extended length of 33". Roofnest CS said they weren't sure where to get them 'cause they've moved on to a different design for gen 2. :neutral:
Secondly, I'm looking for T nuts. The ones they linked me to cost $12 in shipping for a .48 part. These are 20mm x 13 x 5, and I can't find an equivalent at Fastenal or Amazon.

Anyone gone through this that can shed some light?
Click to expand...

I'm pretty sure I have a ton of extra t nuts. If you want them just PM me and I'll send them to you no cost. The struts can probably be found on a competitor's site. The roofnest is just another re branded Chinese RTT that's sold to all different brands. I always hated their customer service.
 
You must log in or register to reply here.
Top Bottom