Member II
- 4,129
- First Name
- Dave
- Last Name
- Zimmer
- Member #
30139
- Ham/GMRS Callsign
- WRXV870
- Service Branch
- USN Retired
I got to get all the tools out of mine first. LOL. I use these collapsable baskets for groceries and they work great.
Zim
What Did You Do With Your Rig Today?
- Thread starter iamout
- Start date
I got to get all the tools out of mine first. LOL. I use these collapsable baskets for groceries and they work great.
Zim
Member II
- 4,129
- First Name
- Dave
- Last Name
- Zimmer
- Member #
30139
- Ham/GMRS Callsign
- WRXV870
- Service Branch
- USN Retired
Advocate III
- 1,583
- First Name
- Scott
- Last Name
- Pyron
- Member #
32033
- Ham/GMRS Callsign
- GMRS WSEY306
My rig “Mauka” 2023 Nissan Frontier Pro-4X did the opposite of off-roading…. I got the opportunity to take her to the Talledega Speedway and do a few laps on the track! In one way it was “kinda” overlanding….. she got to climb the 33 degree banks in turns at 75 mph. Those bad boys are steep! Television does not do them justice! Awesome day with my son who was behind me in his 2010 Jeep Grand Cherokee.
Attachments
Installed a slider for my little fridge in my little truck
Advocate II
I broke two EGR bolts, then broke the extractor trying to take them out....It's funny now but the Donald in me showed up when it happened....
Off-Road Ranger I
- 3,402
- First Name
- JASON
- Last Name
- SMITH
- Member #
1699
- Ham/GMRS Callsign
- WRUH443
♂️ every five minute job that turns into an all day affair starts this way! I feel for you.
Member III
So happy snow camping season is here where the people are mostly gone the campfires are big and the bugs are back in hell where they belong
www.instagram.com
Shaun Hoffman on Instagram: "Nice day up in the woods trying out the new suspension. #pnwwonderland #pnw #snow #mthoodnationalforest Build Titan swap stock lowers and stock tie rods @bilstein upper control arm @carbon_shocks coilovers @z1offroad
42 likes, 0 comments - oddballcreations on November 18, 2024: "Nice day up in the woods trying out the new suspension. #pnwwonderland #pnw #snow #mthoodnationalforest Build Titan swap stock lowers and stock tie rods @bilstein upper control arm @carbon_shocks coilovers @z1offroad brake lines...
www.instagram.com
Off-Road Ranger I
- 3,402
- First Name
- JASON
- Last Name
- SMITH
- Member #
1699
- Ham/GMRS Callsign
- WRUH443
Off-Road Ranger I
- 3,507
- First Name
- Mike
- Last Name
- Roots
- Member #
16968
- Ham/GMRS Callsign
- GMRS: WSGB862
- Service Branch
- USAF Spook
I understand. I use the plano boxes and ammo cans on the 2nd floor bed rack for tools. But, if I had a camper shell, that would be a different story.
Enthusiast III
I completed an install of a power management tray with fuse block for my SwitchPro last night. Had a reputable mechanic install the switchpro but I didn't realize the spaghetti bowl of wires, looms, and harnesses he'd leave behind would flare up my ocd. : )
Also the mounting of the switch pro bolted horizontally to the fuse box voids its warranty so....
Before and after photos below.
Also the mounting of the switch pro bolted horizontally to the fuse box voids its warranty so....
Before and after photos below.
Attachments
Steward I
It’s getting fresh paint in the morning!
Enthusiast III
Influencer III
- 4,312
- First Name
- Rex
- Last Name
- Drake
- Member #
19540
- Ham/GMRS Callsign
- KI5GH
- Service Branch
- Air Force
Advocate III
- 1,583
- First Name
- Scott
- Last Name
- Pyron
- Member #
32033
- Ham/GMRS Callsign
- GMRS WSEY306
Member II
- 4,129
- First Name
- Dave
- Last Name
- Zimmer
- Member #
30139
- Ham/GMRS Callsign
- WRXV870
- Service Branch
- USN Retired
rgallant
Rank III
Advocate I
- 808
- First Name
- Richard
- Last Name
- Gallant
- Ham/GMRS Callsign
- VE7REJ
- Service Branch
- RCAC (Reserve) 75-00
Finishing up the last of the repairs on my 2004 Discovery after our club year end camp out :
- Replaced both front hubs - left front was going
- Replaced the Water pump was leaking out of the weep hole - it was a beautiful Bronze impeller pump 10 + years old, now a sheet metal impeller
- Battery started to fail on the trip as did the starter (was hoping just battery no such luck) - replaced battery
- Starter is failing new arrives from the UK this week with luck
Advocate II
The solar cabinet is starting to take shape. Tomorrow's goal is to finish the remaining connections and wrap the exterior. Hopefully I will install this cabinet soon so I can begin the pull out kitchen!
Attachments
Made a wrench to help turn my Maxtrax pins. They tend to seize up when it's cold or they're dirty. What do you think? Helpful? Ideas to make it better? Am I the only one with this problem?
Check out the full make video at .
Check out the full make video at .
ravend3
Rank II
Enthusiast II
Took the battery out and placed it on a charger. Prepping it to replace a heater core that decided to explode and getting ready to replace the diff fluid alongside the axle shaft seals.
Steward I
Paint is done! The pictures came out blurry for some reason, but here it is.
