What Did You Do With Your Rig Today?

[TRLWANDR]

Installed a Smittybilt XRC 10k winch on the 4th Gen Runner, finally! Had the CBI bumper installed since 2015. The control box didn't fit on the top mounts of the winch due to the height of the bumper so I had to modify it by welding a piece of flatbar to the bumper next to the winch and mouting the control box to the flat bar. Also, upgraded to a Factor 55 Pro Link & 1.5" fairlead.

 

[tmhippo7]

Got new AllPro rock sliders for my birthday last month. Time to get rid of those factory steps ! cleaned primed and painted them today. Will install tomorrow hopefully .

 

[RoarinRow]

Installed this seat post mount for my iPad. It came with an optional vibration clamp to mount but I don’t have anything that it can attach to, at least not easily. So I will expect some vibration. We’ll cross that bridge when we get there.

 

[Broke]

Saturday I took mine for an alignment. Everything is good. So I am ordering more parts... death wobble is fun!

 

[Kilo_17]

Well, in waiting for my BL to arrive I found the limits of flex with my new wheels and tire setup...

Had to remove my rear fender flares due to the metal "tab" on the inside getting caught up


That hole had a plastic screw tab that was bent more allowing the screw to point towards the tire( same exact spot on pass side too )

 

[Kilo_17]

Also cleaned up and polished the headlights, they have been needing it for a while

 

[SparkySparks]

Got a really good deal on a snorkel a few months back and finally decided to install it.

 

[Kilo_17]

Got a really good deal on a snorkel a few months back and finally decided to install it.

Oh man I couldn't imagine cutting up our 4runner, not untill it's paid off at least

It turned out sweet looking, now ya gotta dive er deep lol

 

[The Captain]

Went looking for the 20 litres of water I lost in the back.

 

[RickR]

Look what happened today.

 

[RoarinRow]

Look what happened today.

View attachment 158090View attachment 158091

Looks perfect there!

 

[RickR]

Thanks.

 

[Graeman]

Saturday I took mine for an alignment. Everything is good. So I am ordering more parts... death wobble is fun!

Did you recently install wheels and tires? Out of balance will cause the wobbles, suspension components not torqued to specs, stock star washers that hold the rotors on will also cause the wobbles. I had new tires installed and I got the wobbles really bad. Took it to another store and found out the 1st one did a terrible job of balancing the new tires. Cleared it right up.

 

[Graeman]

Today after work I finished up with my Reflectix heat barrier installation on the JK. We doubled up on the layers for the rooftop and this weekend we will be laying it on the floorboards to get rid of the AZ summer road heat, as well. Total cost including the spray can of 3M commercial grade adhesive - $39 at Home Depot.

 

[Graeman]

Today after work I finished up with my Reflectix heat barrier installation on the JK. We doubled up on the layers for the rooftop and this weekend we will be laying it on the floorboards to get rid of the AZ summer road heat, as well. Total cost including the spray can of 3M commercial grade adhesive - $39 at Home Depot.

Now to clean up the excess spray that I just noticed in the rear section and it is done.

 

[roots66]

I spent 5 hours driving over uneven terrain, through tall grass and thick brush, throwing dust everywhere, and getting absolutely filthy. In other words, I mowed the yard.

 

[Remington_Johnson]

Got the new Overland Pros 270 awing installed this morning. Can’t wait to actually use it. Will post more when I actually get the chance to open it.

 

[TRLWANDR]

Put on my OB emblem!!!!

 

[Trad77]

Got the new Overland Pros 270 awing installed this morning. Can’t wait to actually use it. Will post more when I actually get the chance to open it. View attachment 158178View attachment 158179

I used to have a 92' full size Blazer just like this one. Seeing these pictures makes me miss it. haha. Good lookin' rig! Nice work.

 

[Remington_Johnson]

I used to have a 92' full size Blazer just like this one. Seeing these pictures makes me miss it. haha. Good lookin' rig! Nice work.

Thanks man. Yeah I have a love/hate relationship with this Tahoe. But that’s any rig you build. Haha. Plus I feel it’s a unique look in the overland community. Don’t see too many.