Ranger Advice

JonathanPeters

JonathanPeters

Rank 0

Contributor I

60
Des Moines, IA, USA
First Name
Jonathan
Last Name
Peters
So I’m thinking about an upgrade in tire on a stock 2019 Ford Ranger. Currently have Bridgestone Dueller A/T 255/65R17. Someone suggested General Grabber A/Tx 245/70r17. Does anyone know what size tire you can go up to without lifting or leveling? I know nothing about tires and the Internet doesn’t offer much that I can understand. I just want a little more clearance. Any advice is appreciated.
 

Attachments

  • 5DB47ADE-D106-4077-AE52-2330878E6F53.jpeg
    5DB47ADE-D106-4077-AE52-2330878E6F53.jpeg
    223.5 KB · Views: 15
  • Like
Reactions: Luis Merlo
A 265/70/17 is the best option with only a very minor rub in some cases when using aggressive tires.

Have fun. :)
www.ranger5g.com

Biggest tires, no lift?

How much bigger can we go with no lift? Looking at 265/70/17 which are 31.6 vs the stock 265/65/17 which are 30.5. so that only equates to 1/2" difference in diameter approx.
www.ranger5g.com www.ranger5g.com

Alternative sizes are 265/65/17, 255/75/17 and 255/70/17.
 
  • Like
Reactions: JonathanPeters
If you want to avoid lifting/leveling mainly have to stick with 265 tires. On my Ranger I currently have 275/70R17 K02s on Icon wheels with an Icon Stage 2 suspension and at full lock and compression I still get a little rub but that'll be sorted out soon. The 275/70 would work on a stock truck with some rub at full lock either direction. Adjusting the crash bars and removing the plastic bits would help the rub. But the main issue you'll run into is the clearance from the tire to the upper control arm. Stock my Ranger had 265/65R17 and I was less than 1/2 in from the UCA, so moving to bigger tires for me meant offset wheels because of the taller and wider tire. You can always PM me if you have any more Ranger questions.
 
  • Like
Reactions: JonathanPeters and JCWages
JonathanPeters said:
So I’m thinking about an upgrade in tire on a stock 2019 Ford Ranger. Currently have Bridgestone Dueller A/T 255/65R17. Someone suggested General Grabber A/Tx 245/70r17. Does anyone know what size tire you can go up to without lifting or leveling? I know nothing about tires and the Internet doesn’t offer much that I can understand. I just want a little more clearance. Any advice is appreciated.
Click to expand...
Local tire dealer can tell you instantly.
 
RVA Overland said:
My plan is to stay skinn and go with 255 75 17. I am running a 2.5 inch level. Good luck on your decision
Click to expand...

I spoke with a local company here in town and I was told that doing a level and adding bigger tires is gonna screw up the geometry and cause unnecessary wear and tear on half shafts and CV’s. After listening and doing some of my own research I think I’m gonna go with the BDS 3.5 lift and add some General Grabber A/Tx 285/70r17s with American racing Baja’s to prevent some UCA rubbing. I just want to do things right and I definitely don’t want to break in the sticks.
 
JonathanPeters said:
I spoke with a local company here in town and I was told that doing a level and adding bigger tires is gonna screw up the geometry and cause unnecessary wear and tear on half shafts and CV’s. After listening and doing some of my own research I think I’m gonna go with the BDS 3.5 lift and add some General Grabber A/Tx 285/70r17s with American racing Baja’s to prevent some UCA rubbing. I just want to do things right and I definitely don’t want to break in the sticks.
Click to expand...
Just be ready to do some crash bar modifications with the 285s on the front to avoid rubbing. Also don’t forget the alignment when it’s all done. Took my dealership 4 hours to do my alignment after suspension and tires went on. Since it was a “custom” suspension he had to do a lot more adjusting.
 
  • Like
Reactions: Lanlubber In Remembrance
WalkerTexasRanger said:
Just be ready to do some crash bar modifications with the 285s on the front to avoid rubbing. Also don’t forget the alignment when it’s all done. Took my dealership 4 hours to do my alignment after suspension and tires went on. Since it was a “custom” suspension he had to do a lot more adjusting.
Click to expand...
Thank you. That has come up and will be done. As much as I want these Rangers to be as good as
Tacoma’s, Ford is making aftermarket stuff hard to do. Hopefully with these Broncos coming out, Ford starts putting more thought into these issues.
 
  • Like
Reactions: Lanlubber In Remembrance
JonathanPeters said:
Thank you. That has come up and will be done. As much as I want these Rangers to be as good as
Tacoma’s, Ford is making aftermarket stuff hard to do. Hopefully with these Broncos coming out, Ford starts putting more thought into these issues.
Click to expand...
Maybe to get an idea what you can expect from Ford is to compare suspensions in an F150 Fx4 to the raptor and maybe that will tell you what they intend for the Ranger/Bronco when they put out the "raptor" versions. I would expect to find your best options in the aftermarket scene though.
 
You must log in or register to reply here.
Top Bottom