DIY PoBack Off-Road Trailer Build

[Jason Shelby]

Done a little more work on the trailer this morning before going to work.

 

[SLPNBG]

Looking good. You might need longer door chains. It doesn't look like you'll have access to your fridge with the table down.

 

[Jason Shelby]

Looking good. You might need longer door chains. It doesn't look like you'll have access to your fridge with the table down.

i can disconnect the chain, once I build my fenders and protection around the bottom of the trailer I’m going to put a lock system together to hold it open straight out to the side

 

[Jason Shelby]

Current update as of today, water system components arrive tomorrow.

 

[Trent Munson]

Very cool!

 

[Jason Shelby]

Also installed a Genesis Offroad Dual Battery Kit with Odyssey Batteries, and wired in an Anderson plug to the rear to charge the dual Odyssey Batteries in the trailer.

 

[Jason Shelby]

Wow didn’t realize till just now it been so long since I showed an update!!

Pic 1)I’ve installed Rock Lights
Pic 2) fuse block for pump, and lighting
Pic 3) 4 Ga wire installed to charge trailer batteries from Genesis Dual Battery Kit
Pic 4) KC lights installed on rear of trailer
Pic 5) Anderson Plug on Jeep for wire on trailer to charge batteries.

 

[Jason Shelby]

1) Rock Lights at Night
2) Water tank and battery box
3) water tank and pump before box
4) water inlet and city hook up
5) no board HOT water

 

[Jason Shelby]

1) Water at rear of trailer (aka kitchen space)
2) shore power hookup
3) outside view of water fill and city hook up
4) refrigerator space, Blackstone storage space, and electric control panel.
5) outside shower

 

[Jason Shelby]

Random pictures of load out and setup.

 

[Jason Shelby]

Overland Vehicle Systems 270 awning installed

First Picture is last weekend, getting ready to drop the 2000lb axle, and install a 3500lb brake axle. This picture is what the trailer will look like afterwards.

Just waiting on axle to arrive.

 

[Lanlubber In Remembrance]

Done a little more work on the trailer this morning before going to work.View attachment 142653View attachment 142654

Very nice. I have been wanting to do similar things to my 6x10 cargo, just on a larger scale. Keep your build a coming !

 

[Lanlubber In Remembrance]

Random pictures of load out and setup.

You have done a great job IMO. I cant wait to get started on my trailer. I wish I had your electrical knowledge. You are very organized with your electronics as well as your complete build.

 

[Jason Shelby]

Random pictures of load out and setup.

You have done a great job IMO. I cant wait to get started on my trailer. I wish I had your electrical knowledge. You are very organized with your electronics as well as your complete build.

YouTube is your friend! LOL

 

[Jason Shelby]

Done a little more work on the trailer this morning before going to work.View attachment 142653View attachment 142654

Very nice. I have been wanting to do similar things to my 6x10 cargo, just on a larger scale. Keep your build a coming !

Still got several things to complete. I have 2 sets of drawers slides for a pull out kitchen area. Then once the axle is swapped out, I plan to build an exoskeleton around the bottom.

 

[USStrongman]

Exo sliders make life easier for reaching the roof and protection. Not a lot fo builders add them but they are an excellent option. Nice build.

 

[Jason Shelby]

Exo sliders make life easier for reaching the roof and protection. Not a lot fo builders add them but they are an excellent option. Nice build.

I’m 6’2” and still have trouble reach on top of the trailer at stock ride height, after the 35” are on I’d never be able to do. Exo sliders are going to super handy, and wife vertically challenged wife will get a lot of use out of them also.

 

[Jason Shelby]

Got the axle installed and new wheels and tires mounted.

 

[Trent Munson]

Looks good! What are you going to do for fenders?

 

[NMBruce]

At first I didn’t see it transforming, but now I do , great job