Enthusiast I
any one with a frontier
- Thread starter Frontieroffroad
- Start date
I have been slowly building a 2013 Frontier PRO4-X over the last couple of years, great platform and there is surprisingly some decent equipment out there for them. I would say the first thing to look at is the suspension and there is no better place than www.nissteclifts.com . Overlanding rigs typically get heavy quick and thee factory suspension is barely adequate for stock weight and off-roading. You can see the current state of my truck and I am working on a rear storage setup now with Whynter dual zone freezer and dual-battery setup. Glad to see someone else giving the tested Frontier a go at overlanding!View attachment 92157
Got my box in the truck and the dogs approve. Now to work on the electrical side of things.....View attachment 92551View attachment 92553
Enthusiast I
Enthusiast III
Currently building our '17 Frontier
Glad to see some others around here
Glad to see some others around here
Pathfinder I
Just picked up a 2010 crew cab se 6 speed. Working on next steps.
I have a 13 pro4x I've been building the last few years. Great and very capable truck. Shes been up the West Coast and cross country a few times.View attachment 119007View attachment 119009View attachment 119010
Member III
- 1,550
- First Name
- Karl
- Last Name
- Fehlauer
- Member #
-
19548
- Service Branch
- Army
In Australia they are called the Nissan Navara D40.
Mine is a 2010 Thai build - built in Thailand and not Spain.
It is a 2.5 litre turbo diesel with the 5 speed automatic gearbox and I have had it from new and it is just about to clock 250 000 km.
I have fitted an ARB Bullbar, side rails and steps and just recently a rear wheel carrier (no photos yet with it on).
The engine has had an ECU tune and a catch can fitted and I have a Long Ranger 70 litre auxiliary fuel tank fit - (150 L of fuel in total).
The suspension is ARB Old Man Emu with a 40mm lift and I am running Cooper ST Maxx 265 x 75 x R16 tyres.
The rear canopy is by Flexiglass and I have a set of Outback Accessories drawers and a MSA fridge slide.
I have just fitted front and rear lockers to it - 4WD Systems auto locker in the front and a Harrop E locker in the rear.
I have the Redarc 12/40 DC-DC battery charger and the second battery is in the rear tub.
I hope to get some better photos of it this weekend but here are a couple below.
Karl
View attachment 119031
View attachment 119032
Mine is a 2010 Thai build - built in Thailand and not Spain.
It is a 2.5 litre turbo diesel with the 5 speed automatic gearbox and I have had it from new and it is just about to clock 250 000 km.
I have fitted an ARB Bullbar, side rails and steps and just recently a rear wheel carrier (no photos yet with it on).
The engine has had an ECU tune and a catch can fitted and I have a Long Ranger 70 litre auxiliary fuel tank fit - (150 L of fuel in total).
The suspension is ARB Old Man Emu with a 40mm lift and I am running Cooper ST Maxx 265 x 75 x R16 tyres.
The rear canopy is by Flexiglass and I have a set of Outback Accessories drawers and a MSA fridge slide.
I have just fitted front and rear lockers to it - 4WD Systems auto locker in the front and a Harrop E locker in the rear.
I have the Redarc 12/40 DC-DC battery charger and the second battery is in the rear tub.
I hope to get some better photos of it this weekend but here are a couple below.
Karl
View attachment 119031
View attachment 119032
Wow, I was thinking about gettin rid of my 2005 Xterra to get a Frontier and you guy’s just nailed the coffin of my Xterra.
I've got a '07 Nismo, they're great trucks
View attachment 119277
View attachment 119277
mine is a 2001 crew cab, getting ready to buildView attachment 119279
Member II
2018 SV 4X4
I order off-road item soon after I bought it, this past September. The build began as the items arrived.
This truck is so nice to drive and even with the suspension upgrades, the rides quality is great.
View attachment 127998
I order off-road item soon after I bought it, this past September. The build began as the items arrived.
This truck is so nice to drive and even with the suspension upgrades, the rides quality is great.
View attachment 127998
Hot Metal Fab Universal Over-The-Bed Rack; Holds any rooftop tent, fits any truck! — Hot Metal Fabrication
The is the Hot Metal Fab Universal over the bed rack. Will hold a roof rack, rooftop tent, or whatever you want to put on it. The top of the rack sits 15 inches tall as measured from the top of the bedrail, with the base being 38 inches long. The width is adjustable up to 12 inches! Universal des
www.hotmetalfab.com
Enthusiast I
