Traveler I
Decided to start a build thread for me. My name is Alex and I drive a 2013 Nissan Frontier CC 4x4. I'm relatively new to the overlanding community. I've always been an outdoor person but never used my truck to get places. I mainly used my back to carry what I need to. But here goes the list so far:
Suspension:
Rough Country front spacers (Soon to be coilovers and tubular upper control arms)
PRG Deaver AAL in the rear
Wheels/Tires:
Factory rims on 285/75/16 Goodyear Duratracs
Gear:
Front Runner Slimline II Roof Rack
Yakima Bedrock System for the bikes
Lights/Wiring:
32" Curved LED light bar
50" Light bar
3" Flush Mount Pod lights for rear bumper (waiting on the guts to cut my bumper up)
Blue Seas Fuse Block under hood
Hella Relay block under the hood
Blue Seas Dual Buss inside
Mic Tuning Switches in a Pro 4X switch cluster
Miscellaneous:
35% Front 5% Rear Carbon Window Tint
Weather Tech In Channel Visors
More is to come. I will be swapping out the spacers for a set of Radflo 2.0 Coilovers and UPC Upper Control Arms. Then a Shrockworks Front and rear bumper. Skid plates, winch, rock sliders and I want to build a custom rear tire mount that'll swing away. Eventually if the wife let's me I'll be adding a camper shell with a matching Front Runner Slim Line II rack for it as well.
And time for the photos:
When it was stock.
Spacers installed with tires
Factory Pro 4X switch panel with Mic Tuning Switches
My Blue Seas fuse holder and Hella Relay Block wired up with a Kicker wire kit
Rear AAL installed going thru a local wifelife management area.
32" light bar fired up for the first time
Wide life management area again. Snow still melting away.
And my pride and joy rack installed finally. Love this thing.
More to come. A friend of mine and me are starting up a social media site for product testing various products in the real world and give our reviews. And see where it leads us.
Thanks for looking and I'll keep this thread updated.
Sent from my SM-N910V using Tapatalk
Suspension:
Rough Country front spacers (Soon to be coilovers and tubular upper control arms)
PRG Deaver AAL in the rear
Wheels/Tires:
Factory rims on 285/75/16 Goodyear Duratracs
Gear:
Front Runner Slimline II Roof Rack
Yakima Bedrock System for the bikes
Lights/Wiring:
32" Curved LED light bar
50" Light bar
3" Flush Mount Pod lights for rear bumper (waiting on the guts to cut my bumper up)
Blue Seas Fuse Block under hood
Hella Relay block under the hood
Blue Seas Dual Buss inside
Mic Tuning Switches in a Pro 4X switch cluster
Miscellaneous:
35% Front 5% Rear Carbon Window Tint
Weather Tech In Channel Visors
More is to come. I will be swapping out the spacers for a set of Radflo 2.0 Coilovers and UPC Upper Control Arms. Then a Shrockworks Front and rear bumper. Skid plates, winch, rock sliders and I want to build a custom rear tire mount that'll swing away. Eventually if the wife let's me I'll be adding a camper shell with a matching Front Runner Slim Line II rack for it as well.
And time for the photos:
When it was stock.
Spacers installed with tires
Factory Pro 4X switch panel with Mic Tuning Switches
My Blue Seas fuse holder and Hella Relay Block wired up with a Kicker wire kit
Rear AAL installed going thru a local wifelife management area.
32" light bar fired up for the first time
Wide life management area again. Snow still melting away.
And my pride and joy rack installed finally. Love this thing.
More to come. A friend of mine and me are starting up a social media site for product testing various products in the real world and give our reviews. And see where it leads us.
Thanks for looking and I'll keep this thread updated.
Sent from my SM-N910V using Tapatalk
Last edited:
