-
Guest, UPDATE We went through the site migration runbook and completed all steps. We will need to complete the migration next week, but will leave the forums up for the weekend. A few days after maintenance, a major upgrade revision to the forum site will occur.
-
2022 Bison Build
- Thread starter Tlipker
- Start date
madcratebuilder
Rank V
Pathfinder I
Excellent first addition. I can recommend 589Fab accessories. Their skid support bracket is a must, rear shock relocation if you do serious off roading. Extended cab is a excellent choice, even with the Bisons added weight you are at a 4dr ZR2 weight. Are you planning on taller tires or any lift?
I do have a few things that I can put on. I have the Rago rear shock protection brackets and a PowerTrays bracket. I still want to get a few more things like a switch system, lights, ARB twin compressor, etc.
To answer your question, I’m not planning getting bigger tires at this time. I want to get some experience with these tires. If I did, I would go to 35” tires and regear. Co-worker just did this. So, I have an idea what it looks like.
To answer your question, I’m not planning getting bigger tires at this time. I want to get some experience with these tires. If I did, I would go to 35” tires and regear. Co-worker just did this. So, I have an idea what it looks like.
Update.
I’ve added the sPOD Bantam X and a circuit breaker going to a BlueSea 6 circuit fuse block in the center console. Winch is installed with a license bracket that flips up for winch use. To the fuse block, a GMRS and HAM radios are connected. Trying to find a place to run the antenna cables from inside the cab to the right side of engine bay. Lights are on order.
I went with KC Hilites all around.
2 - Flex4 Combo (A-Pillar)
2 - Gravity Pro6 Driving (Front bumper)
2 - 3” C3 LED Flood (for rear bumper)
Cyclone V2 6-light - Rock Lights
I’ve added the sPOD Bantam X and a circuit breaker going to a BlueSea 6 circuit fuse block in the center console. Winch is installed with a license bracket that flips up for winch use. To the fuse block, a GMRS and HAM radios are connected. Trying to find a place to run the antenna cables from inside the cab to the right side of engine bay. Lights are on order.
I went with KC Hilites all around.
2 - Flex4 Combo (A-Pillar)
2 - Gravity Pro6 Driving (Front bumper)
2 - 3” C3 LED Flood (for rear bumper)
Cyclone V2 6-light - Rock Lights
Attachments
ChristelandChantal
Rank III
Explorer I
Great to see so many modifications on vehicles that aren't available in Australia.
