Would love to see some of the custom bumpers y'all have built! Hoping to make one soon!
Sent from my iPad using OB Talk
Sent from my iPad using OB Talk
Custom Bumpers
- Thread starter SuckCreekOverland
- Start date
Contributor I
Heres some photos of the one i had fabbed up. I had space left open for some KC C series led squares for some rear facing lights. the open tubed ends double as steps and points to wrap recovery straps around. Then of course line xd the whole thing. Where are you located if ya dont mind me asking
Contributor I
Influencer II
Front is a custom mercenary offroad
Rear is a custom dual swing out bumper...
Sent from my SM-G930T using Tapatalk
Rear is a custom dual swing out bumper...
Sent from my SM-G930T using Tapatalk
Truck looks good! Like the bumpers. What size winch were you able to squeeze in the front?
Sent from my SM-G935V using OB Talk mobile app
Sent from my SM-G935V using OB Talk mobile app
Influencer II
I have JCR front and rear bumpers, currently working on designing a rear swing-out tire carrier to go onto my JCR bumper.
Hi, I have a Ram 2500 and I want to put the spare tire on a swing to go onto my fab4 bumper. I will use that space under the bed for an extra gas tank. It will be great to see your design and what type of material you used.
Thank you
Sent from my iPhone using OB Talk
Influencer II
Thank you.... we were able to fit a 9.5k winch in there.....
Traveler III
Traveler III
and here's the front ..i built mine with 4 x 2 rectangular tubing and 3 and 4 inch flat plate and a little bit of patience and a dash of rock and roll [emoji23]
Sent from my iPhone using OB Talk
Sent from my iPhone using OB Talk
Member III
How tall/what type of lift did you go with for your Commander?and here's the front ..i built mine with 4 x 2 rectangular tubing and 3 and 4 inch flat plate and a little bit of patience and a dash of rock and roll [emoji23]
Sent from my iPhone using OB Talk
Member III
Here's a couple I've made over the years , I try to keep them as simple as possible and tucked in close to the body , I really do miss some of those rigs
Is the back bumper I built . And the front bumper that I'm in the process of building
Sent from my SM-G900P using Tapatalk
Sent from my SM-G900P using Tapatalk
Member III
- 2,827
- First Name
- Kevin
- Last Name
- Trvlr
- Member #
20466
- Ham/GMRS Callsign
- KK7NAZ
- Service Branch
- MM1 US Navy
I hope it's ok to reply to an old thread instead of making a new one.
I needed a couple of bumpers on my Willys for a 2 week trip to CO. I had a piece of 2X6 1/4" wall tube and use that to whip up a couple of bumpers, they each have 2 D rings that are reinforced and in line with the frame rails. The front bumper is also an air tank, has a winch mount and 2" receiver built in and holds 4 lights. The rear has a 7way RV plug, a 2" receiver and back-up lights.
I realize they're not as cool and they don't have the new generation lights that are out now but they have worked well for over 25 years and 100K miles.
I needed a couple of bumpers on my Willys for a 2 week trip to CO. I had a piece of 2X6 1/4" wall tube and use that to whip up a couple of bumpers, they each have 2 D rings that are reinforced and in line with the frame rails. The front bumper is also an air tank, has a winch mount and 2" receiver built in and holds 4 lights. The rear has a 7way RV plug, a 2" receiver and back-up lights.
I realize they're not as cool and they don't have the new generation lights that are out now but they have worked well for over 25 years and 100K miles.
Attachments
Nice. Nothing says fu like 1/4" steel!
My brother has had a couple of the Jeep wagons and trucks over the years. I wish I had gotten one from him back in the '90s
Here is my addition to the bumper build thread:
My brother has had a couple of the Jeep wagons and trucks over the years. I wish I had gotten one from him back in the '90s
Here is my addition to the bumper build thread:
Last edited:
Member III
- 2,827
- First Name
- Kevin
- Last Name
- Trvlr
- Member #
20466
- Ham/GMRS Callsign
- KK7NAZ
- Service Branch
- MM1 US Navy
