What Did You Do With Your Rig Today?

[JimBill]

R&R track bar to install KOR oversized bolts and match fitting bushing sleeves. Had too much slop with the stock bolts and JKS bushing sleeves. While I was there, R&R both drag link ends just because. Working my way through the front end, anytime I need to do something I do a little more, in prep for the future lift and to keep death wobble at bay.
Edit: Bolts now upgraded from 12mm to 9/16 grade 8. Torque spec went from 65 to 125 ft-lbs. A handy tip- add a paint pen stripe, easier to see if the bolt has moved than crawl under with a torque wrench just to check tightness. And if you ever need 9/16 hardware, it is an odd size so don't expect to find grade 8 at the local hardware store. Buy extra in case you loose a nut on the trail!

 

[PCO6]

I built a tailgate table for my Jeep LJ.

I sized it for a Coleman stove … and other uses.

 

[Boostpowered]

Changed oil, oil fitler, fuel filters and rotated tires

 

[systemdelete]

Again I ended up with mine parked and riding in another rig. . .

 

[Lanlubber In Remembrance]

Again I ended up with mine parked and riding in another rig. . .

View attachment 121829

??????

 

[grubworm]

Again I ended up with mine parked and riding in another rig. . .

saves on gas....

 

[Dustinfromohio]

R&R track bar to install KOR oversized bolts and match fitting bushing sleeves. Had too much slop with the stock bolts and JKS bushing sleeves. While I was there, R&R both drag link ends just because. Working my way through the front end, anytime I need to do something I do a little more, in prep for the future lift and to keep death wobble at bay.

View attachment 121775

Doing the exact same thing right now! I feel your pain

 

[RoarinRow]

Day out with the fam and getting dirt on my rig lol.

 

[Mr. Nelson]

Did this a couple days ago, but wanted to make sure I loved it. Softopper bed cover, easy install great for and finish, I love this thing!

 

[Lanlubber In Remembrance]

Did this a couple days ago, but wanted to make sure I loved it. Softopper bed cover, easy install great for and finish, I love this thing!View attachment 121956View attachment 121957

Did this a couple days ago, but wanted to make sure I loved it. Softopper bed cover, easy install great for and finish, I love this thing!View attachment 121956View attachment 121957

Nice rig, just bought a set of tires just like yours. Haven't put them on yet though. Cover should help to keep things cleaner.

 

[joshjunior]

Not today but..I took my tent/truck out for a small shakedown run..

 

[roots66]

Just picked up a yard of rocks.

 

[Shamu]

My brother and I enroute to The Wall and Dollhouse 2 & 3...surprised I have a cell signal.

 

[roots66]

Just picked up a yard of rocks. View attachment 122032

And, another half yard, because one trip is never enough. [emoji6]

 

[SSG ALLHANDS]

Drove to Vermont, past Bennington,

 

[JCWages]

My brother and I enroute to The Wall and Dollhouse 2 & 3...surprised I have a cell signal.
View attachment 122035View attachment 122035

Steel Bender scares me. My rig isn't ready for that level of crazy. Metal Masher was tough enough. lol

 

[systemdelete]

Parked it at the local Starbucks.

 

[Lanlubber In Remembrance]

Parked it at the local Starbucks.

View attachment 122129

Watch out, you might get lost in that parking lot. LOL

 

[systemdelete]

Watch out, you might get lost in that parking lot. LOL

I brought a map. lol

 

[Lanlubber In Remembrance]

I brought a map. lol

I bought a GPS about 5 years ago. Still trying to figure out how to use it. Old dogs don't always learn new tricks !